SAFETOP basic fall arrest kit with ELBRUS 71B positioning belt

An anti-fall kit made up of Arnés Trevinca 80071B, rope of 1,7 m adjustable 80107 Belt 80048 2 muskets 80112 Backpack 80124.

POSITIONING BELT CHARACTERISTICS

• Category III PPE
• Position belts for attachment work
• Two attachment points with metal rings, located at the ends of the belt
• Comfort belt padded with great comfort
• Adjustable on the front wall
• Once fitted, using metal pins, it is very easy and quick to connect
• Sewn latches at both ends of the front of the belt to secure the strap
• Dimensions: 61 cm (long) x 18 cm (high, at the top)
• Maximum length of the strap: 120 cm
• The materials: 100% polyester - Zinc coils covered with steel

Weight

0,5 Weight

Maximum load of work

150 weight

Packaging

1 you

CHARACTERISTICS OF THE ADJUSTABLE ROPE

• Category III PPE
• Yellow-black braided polyester rope for easy visibility
• Mounting or fixing device in a working position
• Controlled by a metal ring
• Adjustable wear of 1.7 meters.
• Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, dyed
• Made from polyamide and polyester.
• Connection to horizontal lifelines or fixed anchorage points supporting a force of at least 15 Kn
• The anchorage point shall be located above the connection point of the slip harness
• The safety harness may be used as: * In connection with an energy absorber as a safety harness, according to standard EN354. * As a positioning cord according to EN358

o 10,5 mm

Materials

polyamide / polyester

Force of breakage (Kn)

22 Kn

Persistence of the fibres

0,6N/tex

Weight

350 g approximately

CHARACTERISTICS OF THE HARNESS

• Category III PPE
• Full body harnesses with three anchorages
• Back coupling by metal ring
• Of a kind used on motor vehicles
• 40 cm dorsal sling for connecting damping sub-assembly
• Closing buckle and breast adjustment
• Other, of circular cross-section
• Other, of circular cross-section
• Sublute band between the two thigh bands
• four personal adjustment points, two chest and two leg
• Valid for single use
• Flat-rolled products of iron or non-alloy steel
• Polyester straps of a width of 44 cm

Adjustable dorsal

I DID

Tape frontal of attachmentpectoral

1

Loops tool holders

NO

Padded

NO

Weight

990 g

Carvings available

Standard andOTHER

Packaging

1 you

CHARACTERISTICS OF THE BAG

• Polyester bag, designed to hold fall-proof equipment.
• In black
• High strength fabric
• Waterproof
• Measures 40x37 cm
• Package size: 1ud (individually paid)

WORKING AREAS OF THE FALL PREVENTION KIT

Suspension on the surface, installation of collective shields, fixation to horizontal lifelines, among others.

STANDARDS AND REGULATIONS

EN361 (whole body harness)

IN354 (mooring equipment)

In the case of vehicles of categories M1 and N2

IN362 (musket)

ABOUT SAFETOP

It is an innovative company specialising in personal protective equipment with international commercial activity. Their approach is to distinguish themselves and offer an added value that leaves its mark on the products and services they offer, innovating and developing solutions to the new challenges posed by achieving a working environment with a level of protection, comfort and personal safety that meets today's social requirements.