€99.85 (no TAX)
SAFETOP harness fall arrest kit, ropes and carabiners Elbrus 71B
Fall protection equipment consisting of a harness with front and back attachment.
€39.65 (no TAX)
Fall team composed of Arnés Trevinca Ref. 80071B with front and rear coupling. Eslinga ref. 80275. 2 steel muskets and a practical carrying bag Ref. 80124.
CHARACTERISTICS OF THE TREVINCA HARNESS
- This Regulation shall be binding in its entirety and directly applicable in all Member States. 80071B: Basic anti-caking harness with yellow polyamide strips combined with black
- Tape of a width of 45 mm
- 1 dorsal attachment point and two front loops
- Machinery for making pulp of fibrous cellulosic material
- In yellow with easy visibility for easy identification and black
- Back coupling by means of a metal ring and front coupling by means of two loops to be connected simultaneously to a connector
- Secondary ribbon: 24 mm wide
- Machinery for making pulp of fibrous cellulosic material
- Tape width: 44 mm
- Valid for single use
DATA TECHNICAL |
|
Points of anchorage total |
3 |
Points of anchorage frontal |
2 |
Point of anchorage dorsal |
1 |
Adjustable in the part rear |
I DID |
Adjustable in legs |
I DID |
Tape frontal of attachmentpectoral |
1 |
Loops tool holders
NO
Padded
NO
Weight
990 gapproximately
Carvings available
Unique
Packaging
1 you
Lifetime
Reviews: Reviews must be carried out annually by a person authorised by the manufacturer or by the manufacturer.
Use chart: The equipment use chart shall be completed in accordance with the instructions supplied with the harness. Never lose the user card. It can be requested at an inspection and must be properly covered.
CHARACTERISTICS OF CONNECTING ROPE
- Category III PPE
- Polyester rope of 1 m manufactured with headgear at the ends for connecting muskets
- Braided in yellow-black with easy visibility
- Mounting or fixing device in a working position
- Total length (from guard to guard): 1 m. Other, of circular cross-section
- Made from polyamide/polyester
- Manufacture from materials of any heading, except that of the product
- Musketeers must be certified according to EN362
- The safety rope can be used as:
* Connected to an energy absorber as a safety harness according to EN354.
* As a positioning cord according to EN358
DATA TECHNICAL |
|
Thickness of the rope |
o 10,5 mm
Materials
polyamide / polyester
Force of breakage (Kn)
22 Kn
Persistence of the fibres
0,6N/tex
Weight
350 g approximately
Lifetime
Lifetime Reviews: The equipment must be reviewed every 12 months by an authorised person or by the manufacturer. Inspections shall be recorded on the review sheet attached to the PPE together with the instruction manual. The maximum lifetime is 5 years from the date of first use, unless the equipment is defective or has already been used to stop a fall, in which case it must be discarded immediately. Cleaning: clean with soap and water not above 30oC. Don't dry in the heat.
CHARACTERISTICS OF STEEL MUSKETS
- Includes two 80112 muskets, 25 Kn strength and 17 mm aperture
- of a thickness of not more than 10 mm
- Measures 108x60 mm
- Weight: approximately 170 g
EQUIPMENT BAG FEATURES
- Packaging bag ref. articles of apparel and clothing accessories
- Manufactured from high strength and waterproof fabric
- Measures 40x37 cm.
APPLICATIONS OF THE FALL PREVENTION KIT
For surface suspension, installation of collective protective equipment, attachment to horizontal lifelines, etc
USE REVIEWS
Shelf life: see instruction manual
Reviews: Reviews should be carried out annually by a person authorised by the manufacturer or by the manufacturer.
Use chart: The equipment use chart shall be completed in accordance with the instructions supplied with the harness. Never lose the user card. It can be requested at an inspection and it must be properly covered.
CERTIFICATION
EN361 (whole body harness)
EN354 (mooring equipment)
For the purposes of this Regulation, the following definitions shall apply:
ABOUT SAFETOP
It is an innovative company specialising in personal protective equipment with international commercial activity. Their approach is to distinguish themselves and offer an added value that leaves its mark on the products and services they offer, innovating and developing solutions to the new challenges posed by achieving a working environment with a level of protection, comfort and personal safety that meets today's social requirements.
heading
Ficha Técnica Ficha Técnica Kit anticaídas de arnés SAFETOP cuerdas y mosquetones Elbrus 71B download
Declaración de Conformidad El "arnés Trevinca 80071B" identi cado anteriormente se ajusta a la legislación pertinente de armonización de la Unión Europea: Reglamento (UE) 2016/425: de acuerdo al standard EN361:2002. download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@