Fall arrest kit with Teide harness and 1.5 m SAFETOP rope

Fall team composed of: Arnés Teide Ref. 80070B, with three attachment points: two pectoral attachment rings and one dorsal ring to place the connecting subset. 1.5 m polyester rope, manufactured with headgear Includes two 80112 muskets, 25 Kn resistance and carry bag Ref. 80124 of polyester.

CHARACTERISTICS OF THE HARNESS

• Category 3
• Full body harnesses with three anchorages
• Two breast fastening rings
• A back ring to place the connection subset
• Shoulder and thigh strap adjustment buckle
• Closing and adjusting buckle on the secondary ribbon joining the two ribbons
• Subgluteal band joining the two thigh bands
• The tapes are 45 mm wide
• Valid for single use

Padded

NO

Weight

1150 g

Packaging

1 you

CHARACTERISTICS OF CONNECTING ROPE

• Category III PPE
• Yellow-black braided polyester rope for easy visibility
• Mounting or fixing device in a working position
• Total length (from guard to guard): 1,5 m. Diameters: 12 mm
• It's made of polyester.
• Extremes manufactured with thermoset and reinforced inside links for connecting muskets.
• Musketeers must be certified according to EN362
• The safety harness may be used as: * In connection with an energy absorber as a safety harness, according to standard EN354.

22 Kn

Persistence of the fibres

0,6N/tex

Weight

350 g approximately

CHARACTERISTICS: STEEL MUSKETS

• Category III PPE
• made of steel with a screw-through manual locking mechanism. 19 mm of aperture
• Maximum resistance: 25 Kn (longitudinal, when the door is closed and locked)
• Size: 108 x 60 mm
• Weight: 170 g approx type B
• Connector used as component

Revisions and lifetime

Reviews: The equipment must be reviewed every 12 months by an authorised person or by the manufacturer. Inspections shall be recorded on the review sheet attached to the PPE together with the instruction manual.

See instruction manual to identify the maximum lifetime of the equipment.

Cleaning: clean with soap and water not above 30oC. Don't dry in the heat. Lubricate the visages and opening handles occasionally after washing.

CHARACTERISTICS OF THE BAG

• Polyester bag, designed to hold fall-proof equipment.
• In black
• High strength fabric
• Waterproof
• Measures 37x32 cm.

APPLICATIONS

Suspension on the surface, installation of collective shields, fixing to horizontal lifelines, etc.

STANDARDS AND REGULATIONS

For the purposes of this Regulation, the following definitions shall apply:

EN354 (mooring equipment)

For the purposes of this Regulation, the following definitions shall apply:

ABOUT SAFETOP

It is an innovative company specialising in personal protective equipment with international commercial activity. Their approach is to distinguish themselves and offer an added value that leaves its mark on the products and services they offer, innovating and developing solutions to the new challenges posed by achieving a working environment with a level of protection, comfort and personal safety that meets today's social requirements.