Retractable fall arrest device for work at height IRUDEK ATEX Sekurblok

Sekurblok automatic replacement antiques with synthetic crankcase and galvanized steel cable Ø4.5 mm. Includes 1 Steel Closing Closing Thread at the top 1 new automatic steel, rotating carabiner, with drop indicator at the lower end to prevent the cable from being tied during use.

The Sekurblok fall arrester is certified in accordance with Directive 94/9/EC on protective devices and systems for use in potentially explosive atmospheres. AVAILABLE SIZES: 7.5m, 10m, 15m, 20m, 30m

CHARACTERISTICS

• Robust: High resistance synthetic character, offering long durability.
• Sure: for maximum loads of 140 kg reducing the impact force below 6 kN
• Rotating ring: to avoid tangles and improve the operation of the equipment.
• Drop indicator: in case of falling the green line becomes red, indicating the fall of the user.

TECHNICAL DATA

MATERIALS

Material: Galvanized steel (4.5 mm)

Crankcase: Synthetic

PACKAGING DATA

• Length: 75M
• Weight: 3.57kg
• Dimensions: 172x87x390
• Packaging length: 55 cm
• Packaging width: 19cm
• Packaging height: 10cm

SEKURBLOK CONNECTORS

Bottom Connector 976:

• Opening: 20mm
• Material: Steel
• Resistance: 23 kN
• Closing: Automatic
• Rotatable: Yes
• Fall witness: Yes

Top Connector 981:

• Aperture: 21mm
• Material: Steel
• Resistance: 25 kN
• Closure: Thread
• Rotatable: No
• Fall witness: No

APPLICATIONS

Indicated for work at height and in potentially explosive spaces

USEFUL LIFE

The estimated useful life of the equipment is unlimited. The following factors can reduce the useful life of the product: intensive use, contact with chemicals, particularly aggressive environments, exposure to extreme temperatures, exposure to ultraviolet rays, abrasion, cuts, strong impacts, or poor use and maintenance. The mandatory annual review will validate the correct operation of the equipment. It is mandatory that the equipment be examined by the manufacturer or an authorized person at least once a year. In the event that a fall has been arrested, the equipment must be removed from use.

ATTENTION

-A fall arrest harness is the only acceptable body restraint device that can be used in a fall arrest system. -The fall protection system must be connected only to the harness connection points that are identified with the capital letter "A". The identification "A/2" indicates that it is necessary to connect two connection points with the same identification at the same time. It is prohibited to connect the protection system to a single connection point that is identified with "A/2".

-The connection to the anchor point and other equipment must be made through carabiners in accordance with EN 362.-For use with fall arresters EN 353-1, EN 353-2, it is recommended to connect the equipment to the front anchor point of the harness. For use with EN 355 energy absorbers or EN 360 fall arresters, it is recommended to connect the equipment to the dorsal anchorage point of the harness. -Before each use of personal protective equipment, it must be carefully checked to ensure that it is in usable condition and functions correctly. -During the pre-use check, it is necessary to carefully check all the elements of the equipment to verify that they do not present signs of deterioration, excessive wear, corrosion, abrasions, degradation due to UV radiation, cuts and incorrect use.

STANDARDS/ REGULATIONS

The Sekurblok Fall Protector Irudek it is classified as PPE (Personal Protective Equipment) in accordance with EU Regulation 2016/425 on PPE and is in compliance with European Standard EN360:2002.

• ATEX94/9/CE
• EN 13463-1
• EN 13463-5

ABOUT IRUDEK

Irudek Group is a group of expanding companies with headquarters in Spain, implementations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is security and guarantee, backed by years of experience and by customers who have placed their trust in its products