Disposable protective coveralls 3M

Differentiated permeability applied to making you return home safe and sound.

The selection of protective clothing 3M offers several features, from the use of specially treated fabrics for better wear protection and greater protection, to breathable back panels for greater comfort. Our experts can work alongside you to help identify hazards and better protect your workers from them.

Standards

There are various tests and standards that apply to protective clothing and choosing a garment can be a difficult task. The following section outlines the different options available to help you select the right product for your employees.

Types of protection
Depending on the materials and manufacture, protective suits can be designed for hazardous applications (with EC category III certificate) or non-hazardous applications (approved with EC category simple certificate 1). Products for hazardous applications can be tested and certified with six different types” of standards, providing information on the ideal use:

Other standards
Some of the protective clothing of 3MTm and its materials are approved for other standards and special applications

Materials

The following is a guide which gives a brief description of the materials used in the range of protective clothing 3M. What. Base materials may have treatments, such as an antistatic treatment, to improve the overall protection it provides.

Nonwovens of polypropylene
Provides protection for light work against non-noxious liquids and dust

Polypropylene directly spun and powdered (SMS)
The different SMS layers can be placed in different layers to adapt the physical and protective properties of the material. Standard SMS material offers high breathability and is a good barrier to dust and limited splashes of liquids. If it is, as in the case of the protective suit 4532+ of 3M, a higher level of splash resistance can be achieved.

Manufacture from materials of any heading
MicrMicroporous laminates’ offer a higher level of protection against liquid splashes, in addition to allowing some breathability.

Non-microporous laminates
‘non-microporous laminates’ can offer a higher level of protection against liquids. Adding several layers of laminate can also increase robustness and chemical resistance.

Design features
Protective clothing 3MThey offer various features depending on your needs. The illustration below highlights some of the available features:

Protective garment 3M™ 4500

Costume 3M™ 4500 is a simple CE certified suit designed and suitable for non-hazardous applications. Whether for use in DIY projects, light cleaning operations, industrial maintenance or environments where hygiene and cleanliness are important, the suit 3M™ 4500 is an excellent economical solution to keep whoever uses it clean and dry.

Typical applications

• Light cleaning
• Storage
• Small repairs
• DIY

Features and Benefits:

• Light duty protection, breathable and lightweight
• Rugged and durable polypropylene fabric of 45 gm2
• Protection flap for the zipper
• Elastic hood, cuffs, ankles and waist
• Available in blue and white
• Double stitching

3M™ 4500
Color: white, blue
CE Category I
Sizes: S-4XL

Fabric material
The material used in the 4500 suit is a soft and breathable polypropylene, which provides air flow, helping to reduce thermal stress and offering greater comfort. A comfortable suit for non-hazardous protection.

Stitching technology
The seams are double to offer Type 5/6 protection.

Protective garment 3MManufacture from materials of any heading

The protective suit 3M™ 4510 is an economical solution that offers quality and protection against limited chemical splashes such as those from aerosol paint, meeting the protection standards of Category III, type 5/6, of the PPE Directive. The material is microporous, allowing air and moisture to escape from the suit, while helping to protect against hazardous substances from the outside.

Typical applications:

• Light industrial cleaning
• Machine maintenance
• Application of spray paint and powder coatings
• Applications of coatings and resins
• Crime scene investigations
• Asbestos inspection and disposal
• Preparation and insulation of construction sites
• Manufacture of cement
• Grinding and polishing
• Pharmaceutical processing and handling of toxic powders
• Clean rooms

Features and Benefits:

• Excellent barrier to dry particles and some limited liquid chemical splashes (EC Type 5/6)
• Laminated microporous material
• Double-sided zipper with protective flap for added comfort and additional protection
• Elastic wrists, waist and ankles for better fit and greater freedom of movement
• Very little fiber
• EN 1149 antistatic treatment to reduce static charge accumulation
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• Biological protection tested according to EN 14126 standard

Protective clothing 3M™ 4510 Type 5/6
Color: white
Other vehicles
Sizes: S-4XL

Fabric material
Protective suit material 3M 4510 with antistatic treatment is made with a layer of soft direct-spun polypropylene and a thin, high-quality polyethylene film with antistatic treatment, providing a good level of barrier efficiency and protection.

Stitching technology
The seams are doubled to provide Type 5/6 protection, certain seams have rim for extra protection.

Protective garment 3M™ 4515

Economical protection against harmful dust The protective suit 3MTm 4515 is an economical solution for protection against exposure to harmful dust, such as asbestos fibres, during site inspections. It offers outdoor protection, while the breathable material allows the air inside to escape to reduce heat and make it uncomfortable. Available in white, blue, red and orange, the range offers protection Category III, type 5/6 in accordance with the PPE Directive against both harmful dust and liquid splashes.

Typical applications:

• Manufacture of cement
• Grinding and polishing
• Light industrial cleaning
• Machine maintenance
• Asbestos inspection and disposal
• Preparation and insulation of construction sites
• Construction

Features and Benefits:

• Excellent barrier against dry particles and limited liquid splashes (EC Type 5/6)
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• 50 gm2 SMS material, robust and very breathable
• Double-sided zipper with protective flap for added comfort and additional protection
• Elastic cuffs, waist and ankles for a better fit and greater freedom of movement
• Releases few fibers
• Available in white, blue, and orange

Protective clothing 3M™ 4515 Type 5/6
Color: white, blue and orange
Other vehicles
Sizes: S-4XL

Fabric material
Protective suit material 3M 4515 has a thick filtering center layer of spray-dried polypropylene between two thinner, softer layers of direct-spun polypropylene, 50gm2 breathable protective material that allows airflow to reduce heat build-up, increasing comfort.

Stitching technology
The seams are double to offer Type 5/6 protection.

Protective garment 3M™ 4520

Made with the latest technology in lightweight and breathable materials, 3M™ presents the protective suit 3M™ 4520, type 5/6 protective garment, in compliance with Category III of the PPE Directive.

Typical applications:

• Asbestos removal
• Manufacture of cement
• Grinding and polishing
• Light industrial cleaning
• Machine maintenance
• Construction work
• Light spray paint and powder coatings
• Asbestos inspections
• Preparation and insulation of construction sites
• Pharmaceutical processing and handling of toxic powders

Features and Benefits:

• Excellent barrier against dry particles and limited liquid splashes (CE Type 5/6)
• SMMMS material technology, for less heat buildup and breathable comfort throughout the day
• Releases few fibers
• Extremely light and comfortable compared to many certified suits available on the market
• Three-panel elastic hood to increase compatibility with other accessories and PPE
• Knitted cuffs and elastic waist and ankles for more comfort and greater freedom of movement
• Two-way zipper with locking tongue on the protective flap for added comfort and protection
• Antistatic treatment in accordance with EN 1149 to reduce the accumulation of static charge
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles

Protective clothing 3MManufacturer's name and address
Color: white with green back panel
Other vehicles
Sizes: S-4XL

The latest materials technology
With 3 layers of sprayed polypropylene between two layers of direct spun polypropylene, the protective suit fabric 3M 4520 has been specifically designed to improve airflow and breathability, thereby reducing heat buildup and increasing comfort. The three central layers act as a filter to effectively protect against dust and harmful splashes. The two outer layers offer strength and durability while maintaining a smooth and pleasant feel.

Stitching technology
The seams are double to offer Type 5/6 protection.

Protective garment 3MManufacture from materials of any heading

The protective suit 3MTM 4530 is a type 5/6 protective garment in accordance with Category III of the PPE Directive, manufactured with breathable SMMS material technology incorporating features designed to provide comfort. In addition, the material has a flame resistant treatment, which allows this garment to be included in the ISO 14116 Index1*.

Typical applications:

• Asbestos inspection and disposal
• Construction site preparation and insulation
• Light industrial cleaning
• Machine maintenance
• Pharmaceutical processing
• Handling of toxic powders
• Paints and coatings
• Grinding and polishing of metal
• Oil and gas industry
• Manufacture of cement
• Welding

Features and Benefits:

• Excellent barrier against dry particles and certain limited liquid chemical splashes (EC Type 5/6)
• Limited resistance to flame spread in accordance with ISO 14116 Index 1/0 (material only)
• Strong SMMS material of 54 gm2, high breathability
• Three-panel elastic hood to increase compatibility with accessories and other PPE
• Two-way zipper with sealable storm flap for greater comfort as well as additional protection
• Knitted cuffs and elastic waist and ankles for more comfort and greater freedom of movement
• Improved triangular reinforcement panel
• Releases few fibers
• Antistatic treatment in accordance with EN 1149 to reduce static load buildup
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• Available in blue (with white triangle) and white

Protective clothing 3M™ 4530 Type 5/6
Color: blue with white rear panel
Other vehicles
Size: M-4XL

Fabric material
With layers of powder-coated polypropylene sandwiched between two layers of direct-spun polypropylene, the protective suit fabric 3M 4530 allows air to flow, improving breathability, thereby reducing heat buildup and increasing comfort. The spray layers are introduced with hot air and act as a barrier. The two outer layers of straight thread make the suit soft and breathable. *The additional flame spread resistance treatment allows the material to provide limited flame spread protection (ISO 14116) when used on a garment of Index 2 or 3. It can extend the life of more expensive thermal protective clothing.

Stitching technology
The seams are double to offer Type 5/6 protection.

*Additional flame spread resistance treatment allows the material to provide limited flame spread protection (ISO 14116) when worn over an Index 2 or 3 garment. May increase the life of protective clothing more expensive thermal.

Protective garment 3M™ 4532+

The range of protective suits 3M™ 4532+ is made with SSMMS material made up of 5 thin layers, providing Category III, Type 5/6 protection with special treatments that provide antistatic protection and greater liquid repellency.

Typical applications:

• Light industrial cleaning
• Machine maintenance
• Pharmaceutical processing
• Handling of toxic powders
• Resin applications
• Grinding and polishing of metal
• Environments with oils and greases
• Paints and coatings
• Manufacture of cement

Features and Benefits:

• Special coatings allow this product to be used in many applications for which SMS suits are not normally suitable
• SSMMS material, consult fabric material
• Three-panel elastic hood to increase compatibility with accessories and other PPE
• Knuckles and waist and ankles with elastic
• Double-sided zipper for added comfort with sealed protective flap for additional protection
• Improved and reinforced triangular reinforcement panel to increase product durability
• Antistatic treatment in accordance with EN 1149 to reduce static load buildup
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• Releases few fibers
• Available in blue (with light blue triangle) and white

Fabric material
The protective suit 3MTM 4532+ is manufactured from 52 gm2 SSMMS fabric. It consists of two outer layers of straight threaded polypropylene (SS) between which there are two layers of powdered polypropylene (MM) and a third layer of straight threaded polypropylene (S) at the bottom. The fabric has been specifically designed to be durable while allowing for airflow, reducing heat concentration and increasing comfort. The two intermediate layers act as a filter to efficiently protect against harmful dust and splashes, while the outer layers offer robustness and increased resistance to liquids, which is obtained through alcohol and oil repellent treatments.

The treatment causes the oil to remain in a droplet instead of soaking into the fabric.

Sewing technology
The seams are doubled to provide Type 5/6 protection, certain seams have rim for extra protection.

Protective garment 3M™ 4535

If you are looking for the perfect balance between protection, durability and added comfort, the protective suit 3M™ 4535 is what you are looking for. It offers Category III, type 5/6 protection, approved in accordance with the PPE Directive and uses a dual material design with new comfort features to optimize user acceptance.

Typical applications:

• Asbestos inspection and disposal
• Preparation and insulation of construction sites
• Manufacture of cement
• Grinding and polishing
• Pharmaceutical processing and handling of toxic powders
• Applications of coatings and resins
• Light industrial cleaning
• Machine maintenance
• Spray paint and powder coatings
• Forensic investigation

Features and Benefits:

• Excellent barrier against dry particles and certain limited liquid chemical splashes (EC Type 5/6)
• Superlight and robust microporous material
• Extra long rear breathable panel to improve air circulation and reduce thermal stress
• Double-sided zipper with protective flap for extra protection.
• Woven wrists with elastic waist and ankles for greater comfort and freedom of movement
• Low fiber shedding
• Antistatic treatment in accordance with EN 1149 to reduce the accumulation of static charge
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles

Protective clothing 3MManufacturer's name and address
Color: white with blue rear panel
Other vehicles
Sizes: S-3XL

Fabric material
The front of the protective suit 3M™ 4535 combines a high quality polyethylene laminate that provides an excellent barrier, over a layer of soft spun polypropylene fibers, creating a robust yet comfortable 55 gm2 protective fabric. The large blue panel on the back is made up of 5 layers of spray-dried, direct-spun polypropylene that provide excellent breathability while maintaining Type 5/6 protection.
Rear panel of SMMMS
Microporous laminated fabric

Sewing technology
The seams are doubled to provide Type 5/6 protection, certain seams have rim for extra protection.

Protective garment 3MManufacture from materials of any heading

Thanks to its dual material technology of the highest quality and its protection approved with the CE Category III type 5/6 mark, the protective garment 3MTm 4540+ is suitable for applications where a high level of protection and comfort is sought.

Typical applications:

• Asbestos inspection and disposal
• Preparation and insulation of construction sites
• Manufacture of cement
• Grinding and polishing
• Pharmaceutical processing and handling of toxic powders
• Spray paint and powder coatings
• Applications of coatings and resins
• Light industrial cleaning
• Machine maintenance

Features and Benefits:

• Excellent barrier against dry particles and certain limited liquid chemical splashes (EC Type 5/6)
• Soft, lightweight, microporous laminated material with very few fibres. It fits well to the body providing freedom of movement
• Rear panel made of breathable SMMMS material to improve air circulation and reduce heat buildup
• Double-sided zipper with protective flap for added comfort and additional protection
• Three-panel elastic hood to increase compatibility with accessories and other PPE
• Flexible wrists, waist and ankles for more comfort and freedom of movement
• Improved and reinforced triangular rear panel to increase product durability
• Antistatic treatment in accordance with EN 1149 to reduce static load buildup
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• Releases few fibers

Fabric material
Protective suit material 3M 4540+ is made on the basis of a layer composed of soft straight thread fibres and a layer composed of a high quality laminated polyethylene film providing an excellent level of barrier and protection effectiveness. Compared to other laminates, it has a particularly soft touch and fits well to the body. The blue rear panel is made up of 5 layers of polypropylene of direct yarn and pulverised which provide excellent breathability while maintaining Type 5/6 protection.
Rear panel of SMMMS
Microporous laminated fabric

Sewing technology
The seams are doubled to provide Type 5/6 protection, certain seams have rim for extra protection.

Protective garment 3M™ 4545

The protective suit 3M™ 4545 uses the same laminated material as the protective suit 3M™ 4540+. The garment is designed to be comfortable and offer great protection, while still meeting the demanding protection standards of Category III, type 5/6 of the PPE Directive.

Likewise, it is certified as protection against radioactive particles and biological agents and to reduce the accumulation of static charge. In addition to releasing a very low level of fibers, it is ideal for a wide variety of applications such as, among others, work in clean rooms.

Typical applications:

• Asbestos inspection and disposal
• Preparation and insulation of construction sites
• Manufacture of cement
• Grinding and polishing
• Pharmaceutical processing and handling of toxic powders
• Metallurgy
Light industrial cleaning
• Machine maintenance
• Spray paint and powder coatings
• Applications of coatings and resins
• Clean rooms
• Forensic investigations

Features and Benefits:

• Excellent barrier against dry particles and certain limited liquid chemical splashes (EC Type 5/6)
• Biological protection in accordance with standard EN 14126
• Laminated microporous material, soft and light, fits well to the body
• Three-panel elastic hood to increase compatibility with accessories and other PPE
• Two-way zipper with sealable storm flap for added convenience when dressing and undressing, as well as additional protection
• Knitted cuffs, waist and ankles with elastic for more comfort and greater freedom of movement
• Improved and reinforced triangular rear panel to increase product durability
• Very little fiber
• Antistatic treatment in accordance with EN 1149 to reduce static load buildup
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles
• Supplied vacuum packed to save space

Protective clothing 3M™ 4545 Type 5/6
Color: white
Other vehicles
Size: S-4XL

Fabric material
Protective suit material 3M 4545 is 20% lighter than the previous polyethylene laminate material 3M. It is manufactured using a layer composed of soft, direct-spun fibers and another layer composed of a high-quality laminated polyethylene film with antistatic treatment that provides an excellent level of barrier effectiveness and protection against liquids.

Stitching technology
The seams are doubled to provide Type 5/6 protection, certain seams have rim for extra protection.

Protective garment 3MManufacture from materials of any heading

The protective suit 3M™ 4565 offers CE Category III type 4/5/6 protection and boasts a sensational level of protection against liquids combined with a unique, soft feel and a good fit to the body. Tape applied over the seams provides a higher level of overall seam protection and durability compared to Type 5/6 products.

Typical applications:

• Asbestos inspection
• Preparation and insulation of construction sites
• Manufacture of cement
• Grinding and polishing
• Industrial cleaning and maintenance
• Paint and coatings, resins
• Asbestos removal
• Pharmaceutical processing
• Handling of toxic powders
• Clean rooms
• Spray pesticide application

Features and Benefits:

• Excellent barrier against dry particles and against spray splashes of certain liquid chemicals (CE Type 4/5/6)
• Taped seams throughout the suit for better protection and increased durability
• Soft laminated material
• Biological protection tested according to EN 14126 standard
• Two-way zipper with sealable protection flap for greater comfort as well as additional protection
• Three-panel elastic hood to increase compatibility with accessories and other PPE
• Knitted cuffs and elastic waist and ankles for more comfort and greater freedom of movement
• Antistatic treatment in accordance with EN 1149 to reduce the accumulation of static charge
• Low fiber shedding
• Vacuum packed to save space
• Complies with the inward leakage requirements of the EN 1073-2 standard for protection against radioactive particles

Protective clothing 3MManufacturer's name and address
Color: white with red adhesive tape stitching
Other vehicles
Sizes: S-4XL

Fabric material
It is 20% lighter than the previous polyethylene rolling 3M, the protective suit 3M 4565 combines a base composed of non-woven fibres and a polyethylene film providing an excellent level of barrier effectiveness and protection against many harmful liquids. In addition, the laminate yields very few fibers and has an antistatic treatment, making it suitable for a wide variety of potentially hazardous applications.

Stitching technology
The seams are stitched and sealed with a red adhesive tape to offer greater strength and an effective barrier against liquids and particles.

CE type 4:
Testing for type 4 standard requires the material to pass additional tests. The full suit test is performed with liquid volumes greater than the equivalent Type 6 test. More importantly, the material and seams have been permeability tested with at least one chemical to evaluate whether the chemicals can pass through the material. at the molecular level. The construction of the laminate in the protective suit 3M 4565 offers superior performance in this respect compared to most Type 4 products.

Protective garment 3MManufacture from materials of any heading

The 4570 suit is manufactured with advanced film technology focused on a Type 3 protection level for chemicals. It also offers greater mechanical strength. Type 3 suits are suitable when there is a risk of jets or high pressure sprays of a dangerous chemical. The suit 3M 4570 (Type 3) is manufactured from non-microporous materials, which are typically heavier than Type 4 materials. It also has taped and welded seams to ensure a very high level of protection. Its high performance makes it an excellent barrier against aerosols and certain pressurized liquids.

Typical applications:

• Light industrial cleaning
• Machine maintenance
• Pharmaceutical processing
• Treatment of toxic dust
• Application of resin
• Treatment and handling of chemicals
• Spills and cleaning of chemicals and oil
• Refined metal
• Metal engraving
• Decontamination of hazardous waste
• Decontamination and dismantling
• Clean tanks
• Infectious agents/ Biological hazards
• Treatment of toxic dust

Features and Benefits:

• CE marking of category III
• Advanced multilayer technology film designed for protection against: hazardous particles (Type 5), liquid splashes (Type 6), low pressure liquid aerosols (Type 4), liquid splashes under pressure (Type 3) and biological hazards.
• Soft material that reduces noise with movement
• An elastic belt strapped with adhesive and elastic on ankles and wrists for greater comfort and freedom of movement
• Double integrated flap combined with double color code on the zipper
• Large zippers for easier putting on and removing the suit even with gloves
• Seams sealed by co-extruded multi-layer colourless tape, providing a discreet finish and consistent sealing
• Fists with elastic thumb strap, fully adaptable even to high work
• Thumb brace for safe fit
• 3-piece design hood
• Anti-static treatment (EN1149)
• Biological protection according to EN14126
• Cover the chin with adhesive
• Low fiber shedding

Protective clothing 3M™ 4570 Type 3/4/5/6
Colour: Grey with seams sealed with colourless tape
Other vehicles
Sizes: S-4XL

Fabric material:
Multi-laminated non-microporous PE. Advanced multi-layer film composed of a layer of non-microporous polyethylene laminated on a polypropylene base. It offers tensile strength, low fibre loss and effective filtration of both particles and liquids. Soft material with low noise during movement.

Stitching technology
Sealed seam. This seam has a heat activated adhesive tape over the 3 seams. This provides extra protection for permeability tests. There are different types of tapes that can be used depending on the chemical protection required. This seam is the strongest currently. Some suits may also have tape applied to the inside, both to protect and provide additional strength.

CE type 3
Testing for Type 3 suits requires the material to pass additional tests. The full suit test is performed with higher liquid volumes than the equivalent Type 6 and Type 4 tests and with much higher jet pressure. More importantly, the material and seams have undergone permeability testing with at least one chemical to evaluate whether the chemicals can pass through the material at a molecular level.

Manufacture from materials of any heading

From head to toe, we have it all, a wide range of optional accessories to give your workers the body protection they need.

Batting

Lab coat 3M™ 4440

• Made with the same Type 5/6 laminated material as the protective suit 3MManufacture from materials of any heading
• With antistatic treatment
• Knitted cuffs
• Zipper closure
• Available in white

Visiting robe 3MTM 4400

• Made from the same material as the protective suit 3MTM 4500
• 100% soft, breathable and lightweight polypropylene
• Zip closure
• Internal pocket
• Available in blue and white

Boot covers

Boot covers 3M™ 450 & Boot covers 3M™ 440

• elastic in the calf
• Universal size with laces to provide a good fit
• Manufactured from the same Type 5/6 laminated material as the protective suit 3M™ 4535
• The Boot Covers 3M 450 have a PVC sole to reduce the risk of slipping
• Strands of laminated material to minimize particulate release in environments requiring low levels of particle presence, such as cleanrooms

Shoe covers

Covered 3MTM 442

• Manufactured from the same Type 5/6 laminated material as the protective suit 3M™ 4535
• Ankle with elastic
• Antistatic treatment

Covered 3M™ 402

• General protection against common non-hazardous substances
• Printed sole to reduce the risk of slipping
• Ankle with elastic

Sleeves

Sleeve 3MTM 444

• Manufactured from the same Type 5/6 laminated material as the protective suit 3M™ 4510
• 16" length to provide coverage from wrist to upper arm
• Elastic finish on the upper part to ensure good support
• Antistatic treatment

Hoods

Hood 3MTM 446

• Manufactured from the same Type 5/6 laminated material as the protective suit 3MManufacture from materials of any heading
• Antistatic treatment
• Falls on the shoulders to provide excellent cover

Diagram for product selection*

*WARNING: This product selector has been designed to provide guidance on key product features 3M. Among the products shown, some stand out that can be considered; but the suitability of the product will depend on each particular situation and the selection of products should always be made by a competent person knowledgeable about the real working conditions and the limitations of the PPE. This guide only considers skin protection – the user must wear other appropriate personal protective equipment to protect against risks on other parts of the body

** Not suitable for flame protection, only for use with a garment of Index 2/3

Types of protective clothing 3MTM

This guide is nothing but a scheme. It should not be used as the only method for selecting protective clothing. Always read and follow the instructions provided with your PPE 3M™ to ensure a correct choice. The final decision regarding the suitability of these products for a specific situation is the responsibility of the employer. If you have any questions, contact a workplace safety professional. For more information on the performance data of these garments or any other questions please contact your local representative 3M. What. Limitation of liability: except as provided above, 3M is not responsible for any loss or damage, whether direct, indirect, accidental, special or consequential arising from the sale, use or misuse of EPI products, or the user's inability to use these products.

Product selection table*

❒ Most common choice
▣ Also suitable for

* In all cases, product selection must be based on a complete risk assessment. Always read the user information. Usage limitations and performance data should be taken into account to determine the protection needed. If you have questions, contact a workplace safety professional. This guide is nothing more than an outline. It should not be used as the only method for selecting protective clothing. Details on performance and limits are set out in the packaging and instructions for use. Before using any protective clothing, the person who is going to use it must read and understand the instructions for use of each product. Country-specific legislation must be respected. If you have questions, contact a workplace safety professional or 3M: http://3m.com/es/seguridad/. Always check suit material compatibility before making selection. Please note that the Personal Protective Equipment (PPE) shown highlights some of the products that may be considered. The selection of the appropriate PPE will depend on the specific situation and should only be carried out by a competent person who knows the actual working conditions and the limitations of the PPE.

** Consult the instructions for use or technical data sheets for all information.

***The material meets the standard requirements.

LIST OF BOOKS

3M™ Protective Clothing