VFlex FFP2 9162E disposable mask with valve (15 units) 3M

The Particle Mask 3M VFlex offers economical protection and has a V-shaped fold design that flexes and expands around the mouth to achieve a sense of space and comfort while working, with a patented filter material of 3M and a valve to help you breathe.

Confirm in advance with Sekureco.eu date of supply approx.

CHARACTERISTICS

This lightweight, disposable mask folds up completely for easy storage. It also has an integrated adjustable metal nose clip for secure and customized sealing and side lashes for easy placement on the face.

BENEFITS

• It's a cheap mask.
• The V-shaped folds flex and expand around the mouth to improve comfort.
• The patented filter material of 3M it helps you breathe more easily.
• The embossed front panel retains the shape and keeps the material away from the mouth.
• The side lashes facilitate placement.
• The integrated and adjustable metal nose clip provides a secure and customized seal.
• Its fully foldable design makes it convenient and easy to store.
• It is designed to fit perfectly into the eye and hearing protection products of 3M.
• It is available in small and standard sizes to fit faces in different shapes.
• There are different models with and without valves. The valve 3M Cool Flow makes breathing more comfortable.

MATERIALS

For the purposes of this Regulation, the following definitions shall apply:

Containing by weight:

For the purposes of this Regulation, the following definitions apply:

Filter material: Polypropylene

Exhaust valve: Polypropylene or polyisoprene

REGULATORY

The products are classified according to their filtration efficiency and their maximum overall performance against inward leakage (FFP1, FFP2 and FFP3), as well as their utility and resistance to clogging. The performance tests of this standard include penetration through the filter; test of practical behaviour; flammability; breathability and total leakage inwards. Reusable products are also subject to cleaning and storage tests, and mandatory clog resistance tests (the latter are optional for non-reusable products). You can obtain a complete copy of EN 149:2001+A1:2009 from your national standardisation body.

Penetration of the filter

Penetration through the filter, both initial and after 120 mg accumulation with 120 mg NaCl* and paraffin, shall not exceed the following limits: FFP3: 1%

DIFFICULTY IN BREATHING

FFP2

Inhalation at 30I 0,7 mbar

Inhalation at 95I 2,4 mbar

Exhalation at 160 and 3,0 mbar

PLACEMENT INSTRUCTIONS

Choose the most suitable size of the two available. Normal size is suggested for most users. The small size (S) is indicated for those with smaller faces. See Figure 1. Before adjusting the mask, make sure your hands are clean. All components of the mask should be inspected for damage.

Using both hands place your fingers on the top panel with your thumbs inside the mask and slightly fold the center of the nasal clip upwards.

Open the mask by pulling on the top and bottom panels until it takes shape. The elastic bands should stay on top.

3. Take the mask in one hand with the inside towards the face, place it covering the chin and with the nose clip up.

4. Place one band under the ears and leave it on the back of the neck and the other on the crown. The rubber bands must not be twisted. Adjust the top and bottom panels until they are comfortable, without the flat edges over the face and covering from the chin to the nose. You can use the side tabs (marked as "A") for a better fit.

Use both hands to shape the nose clip into the shape of a nose and cheekbones to ensure a good seal. Doing it with one hand may result in less effective adjustment and be risky.

6. A fit check of the mask should be made each time it is worn and before entering the contaminated area.

APPLICATIONS

Assembly and mechanical, cleaning, general manufacturing, metallurgy, oil and gas and transport

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.