Particulate mask FFP2 9320+Gen3SP without valve 3M Aura

The brand's 9320+ mask 3M is a disposable respiratory protection mask, designed to protect against non-volatile solid and liquid particles. It is made with a high-efficiency electrostatic filter material that retains particles up to 0.3 microns in diameter, making it effective against particles such as dust, smoke, fog, aerosols and viruses.

The 9320+ mask features a three-dimensional shape and a soft foam edge that fits comfortably around the wearer's nose and mouth, allowing for greater comfort and a proper fit. Additionally, it features two elastic head bands that secure the mask in place and allow for easy adjustment.

The 9320+ mask meets the standards of the European standard EN149:2001+A1:2009 and is classified as FFP2, which means that it offers effective protection against solid and non-volatile liquid particles and that its filtration efficiency is 94%. or more.

It is important to note that the 9320+ mask is not suitable for use in environments with toxic gases and vapors, nor for use in environments with low oxygen levels. Additionally, it should be discarded after each use and should not be reutilizada.Mascarilla for FFP2 particles 9320+Gen3SP without valve (5 units) 3M Aura. The respirator for manual sanding 3M Aura 9320+ is our filtering facepiece respirator with Aura 3-panel design, adjustable nose clip, sculpted nose panel, and color-coded headbands for comfortable wear. Rated FFP2, it is available in packs of 20.

CHARACTERISTICS

• With our 3-panel Aura design, it is designed to allow greater facial movement while speaking and the high-performance filter material is designed to facilitate breathing.
• Greater facial mobility with the Aura 3-panel design
• Improved breathability through high-performance filter material that allows you to breathe easily.
• Headbands keep the mask in place and are color coded to indicate performance level - blue: FFP2 according to EN 149:2001+A1:2014
• Complies with European standards: CE mark 0086 (EN 149:2001 + A1:2009 FFP2 NR D)
• This product helps protect against certain particles at concentrations up to 10 times the occupational exposure limit

BENEFITS

• The adjustable nose clip, low-profile curved design and sculpted nose panel help ensure a better seal and precise fit, but also a good field of vision and better compatibility with glasses 3M.
• The raised top panel is designed to further minimize glasses fogging and achieve greater sharpness.
• Adjustable nose clip allows for a better seal with a precise fit
• Without latex components of natural origin
• Compatible with eye and hearing protection 3M

MATERIALS

INSTRUCTIONS FOR USE

See figure 1.

Before adjusting the device, make sure your hands are clean. Before each use, all components of the mask should be inspected for damage.

1. With the back side facing up and using the tabs, separate the top and bottom panels.

2. Pull the tabs on the chin and nose panels until the nose clip bends so that the mask forms a cup shape. Make sure both panels are fully deployed.

3. Without releasing the lashes, hold the mask with the open side facing your face and place it on your face.

4a. MASK WITH VALVE: With one hand, hold the sides of the valve to maintain the position of the mask on the face. 4b. Mask WITHOUT VALVE: Hold the mask in one hand with the open side facing your face.

5. With your other hand, take each of the straps and adjust them to your head.

6. Place the top strap on the crown of your head and the bottom strap on the back of your neck and below your ears. The strips should not be twisted. Adjust the top and bottom panels, using the tabs, until comfortable. Make sure the panels are unfolded and the tabs are folded.

7. Using both hands, mold the nose clip to the shape of your nose to ensure a precise fit and proper seal. Pressing the nose clip with only one hand may reduce the effectiveness of the mask.

8. Before entering the workplace, you must check that the mask is properly sealed to your face.

APPLICATIONS

Use the respirator for manual sanding 3M Aura 9312+ as respiratory protection in hand sanding tasks. Our respirator helps provide FFP1 protection against low levels of dust and non-hazardous oil- or water-based mists.

The FFP1 (Class 1 Filtering Facepiece) protects against low levels of non-hazardous dusts and oil- or water-based mists, which are commonly produced during manual sanding and basic DIY activities

The user must be trained in the correct use of the equipment and read and understand the instructions for use. Misuse can cause serious or life-threatening injuries or illnesses

NORMATIVE

Products are classified by their filtering efficiency and maximum total inward leakage performance (FFP1, FFP2 and FFP3), as well as by their usefulness and resistance to clogging. Performance tests of this standard include penetration through the filter; practical behavior test; that of flammability; that of resistance to breathing and that of total leakage towards the interior

Reusable products also undergo cleaning and storage tests, and mandatory clogging resistance tests (the latter are optional for non-reusable products). You can purchase a complete copy of EN 149:2001+A1:2009 from your national standards body.

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.