Escape signal in aluminum Class A left door

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:. It's a strong emergency and evacuation signal that's easy to install. The signal is made with a layer of photoluminescent pigment, (after absorbing light, the product emits it in the dark, so it does not need any electrical source and the product can be charged an indefinite number of times).

The sign is used to indicate the door evacuation signal, in the left direction. Suitable for industrial use.

CHARACTERISTICS

• PVC white 1 mm
• Aluminium lacquered white of 0,6 mm thickness
• Stability with Ta < 55°
• Absorption of negligible water (0.04, - 0,01)%
• Not containing appreciable amounts of lead or phosphorus (less than 0.01%)
• Not toxic

BENEFITS

• High adhesion and strength ink

TECHNICAL DATA

• This Regulation shall be binding in its entirety and directly applicable in all Member States
• For the purposes of this Regulation, the following definitions shall apply:
• This Regulation shall be binding in its entirety and directly applicable in all Member States
• OF WHICH:
• OF WHICH:
• OF WHICH:
• UNIFIED IN ISO 7010: 2012
• THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES
• Other information:

WHAT KIND OF WORK IS APPROPRIATE

They shall be installed in areas directly affected by sunlight or within a zone of influence of luminaires. A signal installed in a poorly lit area would not work with good performance.

BENEFITS

• High adhesion and strength ink

TECHNICAL DATA

• This Regulation shall be binding in its entirety and directly applicable in all Member States
• For the purposes of this Regulation, the following definitions shall apply:
• This Regulation shall be binding in its entirety and directly applicable in all Member States
• OF WHICH:
• OF WHICH:
• OF WHICH:
• UNIFIED IN ISO 7010: 2012
• THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES
• Other information:

IDENTIFICATION OF THE PRODUCT

According to UNE 23035/4:

• Manufacturer's name or mark
• Date of manufacture
• Designation (Class A or Class B as appropriate)

According to RIPCI 513:

• Manufacturer's name or mark

MINIMUM LUMINESCENCE VALUES AFTER SALINE

CLASS A:

CLASS B:

CHARACTERISTICS

PVC SUPPORT MATERIALS

According to UNE 53127:

• White PVC 1 mm for class A and transparent PVC 0,7 mm for class B
• White lacquered aluminum 0.6 mm thick.
• Stability with Ta < 55o.
• Absorption of negligible water (0,04 ± 0,01) %.
• It's self-extinguishing.
• Not containing appreciable amounts of lead and phosphorus (less than 0,01%)
• It's not toxic.

OTHER

According to regulations:

• UNIFIED IN ISO 7010
• OTHER

TEXTS

• According to UNE 23033/1

PHOTOLUMINESCENT PRODUCT

• Composed of pigments.
• Unlimited photoluminescent charge and discharge cycles

COLOUR

Tones by standard:

• UNIFIED IN ISO 7010
• OTHER
• High adhesion and strength ink.
• It allows great flexibility in the final product.
• It's not self-igniting. Not toxic

FINAL THICKNESS

Class A

• PVC 1,2 m/m (± 10%).
• Aluminium 0,8 m/m (± 10%) or more.

Class B

• PVC 0,8 m/m (± 10%) or more.
• Technology" according to the General Technology Note for the "development", "production" or "use" of equipment or "software" specified in 5A001.

REFERENCE

• Printed on the signal

DIMENSIONS

• According to UNE 23033/1

PERCENTAGE OF COLOUR

• According to UNE 23033-1

MAXIMUM DISTANCE OF VISION

• Printed on the signal.

To calculate the necessary dimensions of a signal up to a maximum distance of 50 m, the formula shall be applied:

S≥ L2 /2000

S” represents the surface of the signal in metres squared, and L” the distance in metres from which the signal can be perceived.

MEASURES

Aluminium 0,5 mm Class A

• THE FOLLOWING INFORMATION SHALL BE PROVIDED:
• FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY:
• FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY:

REGULATORY

- UNE 23033/1:2019 (extinct)

- UNE 23033/2:2019 (Installations)

- UNE 23034/1998 (Evacuation of workers)

- OF WHICH:

- SECTION 23035 TO 4/2003

- SECTION 53127/2002

- UNITED IN ISO 7010: 2012

- DECISION NO 314/2006 (CT)

- RIPCI 2017 (extinct)

STORAGE, CLEANING AND PRESERVATION

The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.

The optimum storage temperature shall be between 15oC and 25oC and a humidity of 10/50%.

Cleaning methods; avoid applying abrasive products. It is recommended to clean them with water and neutral detergents.

ABOUT SECURITY

They're occupational safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and safety at work and the lack of a company specialized in the sector. It offers a range of more than 10 000 specialized products for occupational protection, available to companies and individuals, of the best brands and at the most competitive prices on the market.