€3.39 (no TAX)
Cubitron II 115mm 967A 65066 Flat Flap Discs (10 Units) 3M
For the purposes of this Regulation, the following definitions shall apply: 3M. What. The low operating temperature reduces metal discoloration and oxidation as well as heat-induced stress cracks.
€7.03 (no TAX)
Cubitron II 115mm 967A 65066 Flat Flap Discs (10 Units) 3M. Designed to cut faster and last longer than competing ceramic products with PSG grain 3M.
The low operating temperature reduces metal discoloration and oxidation, as well as stress cracks resulting from heat.
Flap discs perform roughing and finishing in a single step, so they can replace rigid wheels and fiber discs.
The durable Y-weight and polyester-cotton backing provides regular, controlled wear allowing full use in low to medium-high pressure applications. The built-in sanding enhancer reduces grinding temperatures on heat-sensitive alloys, thereby increasing their life.
EXCELLENT CUTTING AND FINISHING TASKS
The 967A flap disc 3M™ Cubitron™ II provides excellent cut rates in low to medium-high pressure applications. Our discs are ideal for flat or off-edge working surfaces, especially where final finish and not leaving marks is important.
Use the 967A flap disc 3M™ Cubitron™ II to improve your cutting rates and achieve roughing and homogenization in a single step thanks to its flexible blade design. Our flap discs include PSG grain 3M which provides an exceptionally high cut rate at low pressure. This grain takes the form of triangular points that, unlike traditional abrasives, cut metal cleanly rather than biting or gouging it. These points continually self-sharpen as they fracture, providing extremely fast cutting. Thanks to this, operators can complete demanding tasks, such as weld grinding, rust removal, edge grinding, homogenizing and deburring, with less fatigue. The heat-activated sanding enhancer on the discs makes them an excellent product for all types of metals. This enhancer keeps the blade cool when working on stainless steel and heat-sensitive metals such as nickel and titanium alloys, reducing metal discoloration and oxidation, as well as the risk of heat-related stress cracks. It features a durable, uniquely designed, Y-weight, polyester-cotton backing that exhibits uniform, controlled wear without prematurely dulling or smoothing the surface. This allows operators to achieve more results with a single disc. Flap discs are three-dimensional grinding discs, made up of several superimposed layers of fiber-reinforced and abrasive-coated sheets emerging from a central head. As the overlapping layers of blades wear away, they continually reveal fresh abrasive mineral for a fast, uniform cut, while the cushioning of the blades creates a smooth finish. Under normal conditions, our flap discs will produce a finish one grade finer than the finish of a fiber disc of the same grain from any other manufacturer. This layered design allows more abrasive material to be loaded onto the cutting surface, making them more durable than conventional discs. For this reason, our discs considerably improve productivity in roughing work. These discs perform two tasks in one: roughing and finishing in a single step, so they can replace rigid wheels and fiber discs. They are a useful solution that saves time and money in many applications, especially those where the final finish and avoiding excessive marks are important. Our flap discs work on right angle grinders.
Confirm in advance withSekureco.euDelivery date approx.
CHARACTERISTICS
- The 967A flap disc 3M™ Cubitron™ II provides excellent cut rates in low to medium-high pressure applications.
- Our discs are ideal for flat or off-edge working surfaces, especially where final finish and not leaving marks is important.
- Our flap discs include PSG grain 3M which provides an exceptionally high cut rate at low pressure. This grain takes the form of triangular points that, unlike traditional abrasives, cut metal cleanly rather than biting or gouging it.
- These points continually self-sharpen as they fracture, providing extremely fast cutting.
- The heat-activated sanding enhancer on the discs makes them an excellent product for all types of metals. This enhancer keeps the blade cool when working on stainless steel and heat-sensitive metals such as nickel and titanium alloys, reducing metal discoloration and oxidation, as well as the risk of heat-related stress cracks.
- Flap discs are three-dimensional grinding discs, made up of several superimposed layers of fiber-reinforced and abrasive-coated sheets emerging from a central head. As the overlapping layers of blades wear away, they continually reveal fresh abrasive mineral for a fast, uniform cut, while the cushioning of the blades creates a smooth finish.
- Our flap discs work on right angle grinders.
SPECIFICATIONS
BENEFITS
- Operators can complete demanding tasks, such as weld grinding, rust removal, edge grinding, homogenizing and deburring, with less fatigue.
- It features a durable, uniquely designed, Y-weight, polyester-cotton backing that exhibits uniform, controlled wear without prematurely dulling or smoothing the surface. This allows operators to achieve more results with a single disc.
- Under normal conditions, our flap discs will produce a finish one grade finer than the finish of a fiber disc of the same grain from any other manufacturer. This layered design allows more abrasive material to be loaded onto the cutting surface, making them more durable than conventional discs. For this reason, our discs considerably improve productivity in roughing work.
- These discs perform two tasks in one: roughing and finishing in a single step, so they can replace rigid wheels and fiber discs. They are a useful solution that saves time and money in many applications, especially those where the final finish and avoiding excessive marks are important.
TECHNICAL DATA
Application Category | Grinding/Metal Stock Removal |
Color | Maroon |
Diameter | 115mm, 125mm, 150mm, 180mm |
Diameter (Imperial) | 5 inches |
Center hole diameter (metric) | 22mm |
Product Form | Disc |
Degree | 40+, 60+, 80+ |
Health and Safety | Eye protection, Hand Protection, Ear protection, Respiratory protection |
Industries | Metallurgy |
Brand | Cubitron II |
Position | Premium |
Primary Application | Metallurgy |
Max RPM. | 12000, 13200, 8500 |
Sub Industries | Metal manufacturing |
Kind of way | Right Angle |
Applications | Finishing |
WHAT TYPE OF WORK IS IT APPROPRIATE FOR
Use the 967A flap disc 3M™ Cubitron™ II to improve your cutting rates and achieve roughing and homogenization in a single step thanks to its flexible blade design.
Use for weld grinding, deburring, rust removal, edge grinding and homogenization.
ABOUT 3M
3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@