€1.96 (no TAX)
Informative sign Low (text only) COFAN
Information signal Low (text only) COFAN
Material: adhesive glasspack
Measures 250x62 mm
€1.96 (no TAX)
Information sign in adhesive glasspack with text and pictogram BELOW. The poster is available in size 250x62 to suit the needs of your industry.
It is used to provide information and guidance to people who are in a particular place. The design of the signal may vary, but in no case will the meaning of the signal change.
Among the most common technical characteristics of COFAN signals are:
- Form: it's usually a circle with a blue border and a white pictogram that represents two people keeping a distance of two meters.
- Size: this may vary depending on the size and location of the work area.
- Colours: security signals use specific colors to communicate their message. Blue is commonly used to indicate that personal protective equipment is compulsory.
- The material: safety signs may be made of different materials, such as plastic, aluminium or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or moisture, it is advisable to use a material resistant to these conditions.
THE FOLLOWING POINT IS INSERTED:
The signs of GLASSPACK of 0,7 mm consist of a semi-rigid polymer base (PVC) with a bright white finish to which color coating and protection is applied by screen printing techniques.
Our products are Non-toxic, non-radioactive, non-combustible and resistant to aging.
- SUPPORT: A glass pack of 0,7 mm (semi-rigid PVC) of a bright white colour.
- COLOUR COATING: for use in the manufacture of products falling within heading No 8542:. Colour black, green, red, blue, yellow, orange depending on the signal type. BRIGHT FINISH, PROTECTION OF THE SIGNAL AGAINST UV RAYS.
ADHESIVE PVC SIGN (STICK)
The signs are manufactured on a self-adhesive white gloss calendered monomeric vinyl sheet.
Color coating is applied using serigraphic techniques.
The adhesive is protected against inclement weather by a glossy transparent calendered laminate.
Our products are Non-toxic, non-radioactive, non-combustible and resistant to aging.
Description of the vehicle:
- TRANSPARENT LAMINATE GLOSSY FINISH of 0,8 mm. Transparent film of CALANDRED PVC with MONOMERIC PLASTIFICANT, free of cadmium, with UV filter.
- COLOUR COATING EPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
- SELF-ADHESIVE VINYL 0,08 mm made of white PVC resin. Back side of the adhesive.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Gloss-finished, high optical quality compressed PVC backing especially suitable for printing using screen printing techniques with UV curing inks in offset.
TECHNICAL DATA |
||
|
PROPERTIESS
TEST METHOD
TYPICAL VALUE
Tolerance of the thickness
> 300 £ 400 of which: ± 5%
Density
OTHER D-792
THE 53479
1.33 ± 0.01 g/cm3
Point of softening VICAT
1 kg / in oil / as samples stacked)
THAT 306 TO 50
83 ± 2 °C
Point of softening VICAT
5 kg / in oil / like samples stacked)
THAT 306 TO 50
74 ± 2 °C
Stress a the traction
THAT 527 -1/-2
45 ± 3 N/mm2
Deformation a the traction
THAT 527 -1/-2
5 ± 1%
Point of fluency
THAT 527 -1/-2
36 ± 3 N/mm2
Point of breaking
THAT 527 -1/-2
> 80 percent
Trial of impact
THAT 8256
> 500 kJ/m2
Deformation the impact
THAT 8256
11 ± 2 mm
Absorption of water
OTHER D-570
THE 53495
0.004 ± 0.002 %
SELF-ADHESIVE MONOMERIC VINYL SUPPORT
Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.
TECHNICAL DATA |
||
PROPERTIES |
TEST METHOD |
TYPICAL VALUE |
Materials
Manufacture from materials of any heading calendered monomeric
Finished
White brightness
Thickness
Micrometer Federal Bench
80 of which:
Kind of of adhesive
Manufacture from materials of any heading base water
Adherence
Pellability FTM 1 (180o)
5 N/25 mm
24 h 23°C/50%RH
Method of application
Dry
Elongation
FTM 14
The 0.5 mm
Rank of temperature of
application
-50°C a + 90°C
Kind of of substrate
Aluminium, Glass, PMMA, PC, THE ABS,
Painting
COLOURED LAYER INKS
Colour coating (as required by the signal) by means of multi-use UV cured screen inks on various plastics.
These are brightly finished inks, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in bending and die-cutting.
Mixtures of oligomers, monomers, photoinitiators and pigments.
Ink contains the following dangerous elements:
• Hexametylene diacrylate
• Isobornil acrylate
• Oxybis diacrylate (methyl-2,1-ethanoediyl)
• 1-vinylhexahydro-2H-azepin-2-one
DIMENSIONS
- 250x62 mm
INSTALLATION / LOCATION / PLACEMENT OF SIGNAL
Check our blog to learn how to install a sign or sign: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To properly place an obligation sign indicating that gloves are compulsory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye level and in a place where it cannot be obstructed by other objects or signals.
The FIXED the signalling element must be placed on a firm surface free from dirt.
The signal may be secured by: MECHANICAL COMPONENTS (screws, rivets, etc.) or ADHESIVES (mounting adhesive, glues, silicones, etc.) carefully, avoiding dirt on the visible surface or deformation of the surface.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signalling systems have been designed, SEKURECO recommends that signals be kept free from dust, dirt or any residue or object that prevents their visibility and identification.
For cleaning it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the signal.
The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.
GUARANTEE
SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, on Guarantees in the Sale of Consumer Goods.
ON THE HOOD
Cofan: A company with over 15 years' experience in the hardware sector, industrial supply, and in the manufacture of safety footwear and other personal protective equipment.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@