Anchorage point in aluminium for metal beam - EN 795 class B AT250

The AT250 attachment device is a portable anchorage point, adapted to cooperate with the rail/beam cross section beam. The rail/beam shall be firmly secured to the structure.

• Size: 440 x 100 x 45mm
• Can be used with beams - width 75 - 210 mm;
• Weight: 4,0 kg;
• Manufacture from materials of any heading
• Only one person

-----------------------------------------------

The work at height they require that professionals carrying out activities at risk of falling at different heights must have all the equipment and elements necessary to perform their respective tasks with the greatest possible degree of safety and protection Anchorage point in aluminium for metal beam - EN 795 class B AT250, a temporary anchorage device which must be prepared to allow the connection of a Personal protective equipment (EPI) against falls in height, using a compatible connector that does not allow involuntary disconnection by the new worker. These temporary anchorages are considered PPE and must bear both the CE marking and an information leaflet from the PPE manufacturer.

The Anchorage point in aluminium for metal beam - EN 795 class B AT250 is a portable anchorage device adapted for use with the cross-sectional beam of the rail or beam, which shall be firmly secured to the structure. The dimensions of the anchorage point are: 440 x 100 x 45 mm, it is made of aluminium, weighs 4 kg and allows it to be used with beams with a width of 75 - 210 mm. It's designed to be used by one person only.

Different types of temporary anchorages are available on the market depending on the application for which they have been designed, thus offering options covering virtually all situations that may arise during work at height, vertical work and confined spaces, where special safety measures are also necessary because of their high level of danger.

These types of devices are not permanent, so it is very important that they are checked both before, during and after each use, as well as the structural or resistant element on which it is located that must be able to withstand a fall of 12 kN. There are anchor points made of different materials (textiles, metals ...), and you can find all of them at your disposal in our store, in a wide variety of alternatives.