Clean & Strip Disc XT PRO Extra Cut Green XC-ZR 125mm X Coarse Scotch-Brite Roloc 3M

The Scotch-Brite Roloc + Clean and Strip XT Pro Extra Cut Disc features an aluminum oxide abrasive mineral incorporated into an open nylon mesh. Our discs are designed to remove hard coatings, such as thick layers of rust or paint, and corrosion, while homogenizing and refining the underlying exposed metal.

Get greater conformability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Extra Cut Disc. Our discs feature a combination of redesigned fiber, resin and aluminum oxide mineral abrasive to form a thick, open mesh. Thanks to the spring-like behavior of the fiber, our discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates. They adjust to the corrugations of the weld beads to polish welds and allow you to work in hard-to-reach areas.

Aluminum oxide is a very hard mineral that offers a high cutting rate. Commonly used in high pressure applications such as cutting and weld removal, it cuts aggressively, removing thick layers of rust, paint and corrosion without leaving marks, while preparing the base material. This means that a piece can be stripped and prepared for the next process in a single step, with the same disc, saving time changing abrasives. Additionally, the mesh holes allow chips to escape, preventing clogging of the abrasive. To ensure a consistent cut over the life of the abrasive, the reinforced resin gradually breaks down with use to reveal new fibers and a super-sharp aluminum oxide abrasive. High-strength fiber resists fragmentation and provides low vibration, high speed and long life. These discs offer low vibration and spark, high speed and long life, with the added benefit of a Roloc™ accessory.

The Roloc™+ button is attached to the full length of the disc, increasing strength and ease of use, and allowing you to operate the disc on its edge to clean corner welds and other hard-to-reach areas. Operators can quickly attach the disc to a Roloc™ mount (sold separately) that attaches to the power tool, minimizing setup and connection times and helping to improve productivity. The Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Extra Cut Disc features an aluminum oxide abrasive mineral incorporated into an open nylon mesh. Our discs are designed to remove hard coatings, such as thick layers of rust or paint, and corrosion, while homogenizing and refining the underlying exposed metal.

Confirm in advance with Sekureco.eu delivery date approx.

CHARACTERISTICS

• Aluminum oxide mineral aggressively removes the top layer and refines the underlying exposed metal
• High conformability provides a larger contact surface for faster stripping.
• High-strength fiber resists fragmentation and performs well on edges.
• High speed and low vibration rating
• Requires use of Roloc+ mount (sold separately)
• Get greater conformability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite Roloc + Clean and Strip XT Pro Extra Cut Disc.
• Our discs feature a combination of redesigned fiber, resin and aluminum oxide mineral abrasive to form a thick, open mesh.
• Aluminum oxide is a very hard mineral that offers a high cutting rate.
• Commonly used in high pressure applications such as cutting and weld removal, it cuts aggressively, removing thick layers of rust, paint and corrosion without leaving marks, while preparing the base material.
• This means that a piece can be cared for and prepare for the next process in a single step, with the same album, saving time for abrasive change.
• To guarantee a constant cut during the useful life of the abrasive, the reinforced resin is gradually broken with the use to reveal new fibers and an abrasive of superafilated aluminum oxide.
• These albums offer low vibration and spark, high speed and a prolonged useful life, in addition to having the additional benefit of a Roloc accessory.

SPECIFICATIONS

BENEFITS

• Resists the pacional for a systematic cutting action.
• The Roloc++ fixing system facilitates disk changes
• Thanks to the spring-like behavior of the fiber, our discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates.
• They adjust to the corrugations of the weld beads to polish welds and allow you to work in hard-to-reach areas.
• Holes in the mesh allow chips to escape, preventing clogging of the abrasive.
• High-strength fiber resists fragmentation and provides low vibration, high speed and long life.
• Operators can quickly attach the disc to a Roloc mount (sold separately) that attaches to the power tool, minimizing setup and connection times and helping to improve productivity.

TECHNICAL DATA

WHAT TYPE OF WORK IS IT APPROPRIATE FOR

Cleaning the weld and removing thick layers of oxide, depressions caused by oxidation, thick layers of paint, corrosion, discoloration of welds and sealant

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.