XO-DR purple carbide disc of 50.8 mm X Basto Clean & Strip 3M XT PRO (60 days) 3M

XO-DR purple carbide disc of 50.8 mm X Basto Clean & Strip 3M XT PRO (60 days) 3M. What. The Scotch-Brite Roloc Clean and Strip XT Pro disc features an abrasive silicon carbide mineral embedded in an open nylon mesh. Our discs effectively remove rust, paint, calamine, coatings and adhesives from surfaces without significantly altering the base material.

Remove rust, paint, calamine and metal coatings quickly.

Confirm in advance with Sekureco.eu date of supply approx.

CHARACTERISTICS

• Get more adaptability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite Roloc Clean and Strip XT Pro disc.
• Our discs feature a combination of redesigned fiber, resin and abrasive silicon carbide mineral that form a thick, open mesh.
• Thanks to the behavior of the fibers simulating a spring, these discs are able to follow the contours of the workpiece more precisely, achieving a larger contact area with faster removal rates.
• They adjust to the ripples of the welding cords to polish the welds without removing them, and also allow you to work in hard-to-reach areas without damaging the substrate.
• The silicon carbide cuts aggressively to leave a fine finish.
• Slabs, stains and unwanted contaminants are effectively removed while maintaining the geometry of the workpiece, reducing the need for repetitive work and helping to increase productivity.
• In addition, the mesh holes allow chips to escape, which prevents the abrasive from clogging.
• To ensure constant cutting over the life of the abrasive, the disc reinforcement resin bond is gradually broken with use to reveal new fibers and a super-sharpened silicon carbide abrasive.
• The high-strength fiber resists fragmentation and performs well at the edges. These discs also offer low vibration and spark, high speed and long service life.

BENEFITS

• Remove rust, paint, calamine and metal coatings quickly.
• The high-strength fiber resists fragmentation and performs well at the edges.
• The high adaptability provides a larger contact surface for faster pickling.
• The silicon carbide ore cuts aggressively and leaves a fine finish.
• High speed, low vibration and low spark rating.
• The Roloc fastening system facilitates disc changes.
• Use with the Roloc holder (sold separately)

TECHNICAL DATA

SAFETY AND STORAGE CONDITIONS

Store in the recommended conditions of (16-26°C / 35-50% rH) with a rotation “ first in – first out”. Temperature and humidity conditions outside these ranges should be avoided. Note: The shelf life of the product may be reduced if the original packaging is not properly closed or if the product is stored in a high temperature or humidity environment.

Safety: Please take into account all local safety regulations and industry standards. Always wear appropriate Personal Protective Equipment (PPE) and follow the safety precautions set out in the associated product safety data sheet. These Product Safety Data Sheets are included with the product and can also be found online at www.3M.com This product should always be used on guarded tools and the fiberglass support plate should not be damaged as it may cause injury.

WHAT KIND OF WORK IS APPROPRIATE

Surface preparation and removal of rust, paint, calamine, coating and adhesive.

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.