XB-ZS Non-woven Disc 100mm A XCRS Clean & Strip XT PRO Extra Cut Green XB-ZS X Coarse Scotch-Brite (1 pcs) 3M

XB-ZS Non-Woven Abrasive Disc 100mm x 25mm x 6mm, A XCRS Clean & Strip XT PRO Extra Cut Green XB-ZS X Coarse Scotch-Brite (1 pcs) 3M. The Scotch-Brite Clean and Strip XT Pro Extra Cut Disc features an aluminum oxide abrasive mineral incorporated into an open nylon mesh. Our discs are designed to remove hard coatings, such as thick layers of rust or paint, and corrosion, while homogenizing and refining the exposed metal beneath.

Get greater conformability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc. Our discs feature a combination of redesigned fiber, resin and aluminum oxide mineral abrasive to form a thick, open mesh. Thanks to the spring-like behavior of the fiber, our discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates. They adjust to the corrugations of the weld beads to polish welds and allow you to work in hard-to-reach areas. Aluminum oxide is a very hard mineral that offers a high cutting rate. Commonly used in high pressure applications such as cutting and weld removal, it cuts aggressively, removing thick layers of rust, paint and corrosion without leaving marks, while preparing the base material.

This means that a piece can be stripped and prepared for the next process in a single step, with the same disc, saving time changing abrasives. Additionally, the mesh holes allow chips to escape, preventing clogging of the abrasive. To ensure a consistent cut over the life of the abrasive, the reinforced resin gradually breaks down with use to reveal new fibers and a super-sharp aluminum oxide abrasive. High-strength fiber resists fragmentation and provides low vibration, high speed and long life.

The Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc features an aluminum oxide abrasive mineral incorporated into an open nylon mesh. Our discs are designed to remove hard coatings, such as thick layers of rust or paint, and corrosion, while homogenizing and refining the exposed metal beneath.

Confirm in advance with Sekureco.eu delivery date approx.

CHARACTERISTICS

• Get greater conformability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc.
• Our discs feature a combination of redesigned fiber, resin and aluminum oxide mineral abrasive to form a thick, open mesh.
• Thanks to the spring-like behavior of the fiber, our discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates.
• They adjust to the corrugations of the weld beads to polish welds and allow you to work in hard-to-reach areas.
• Aluminum oxide is a very hard mineral that offers a high cutting rate.
• Additionally, the mesh holes allow chips to escape, preventing clogging of the abrasive.
• To guarantee a constant cut during the useful life of the abrasive, the reinforced resin is gradually broken with the use to reveal new fibers and an abrasive of superafilated aluminum oxide.
• High-strength fiber resists fragmentation and provides low vibration, high speed and long life.

SPECIFICATIONS

BENEFITS

• It eliminates quickly thick layers of oxide, paint and corrosion and clean welding.
• Aluminum oxide mineral aggressively removes the top layer and refines the underlying exposed metal.
• High conformability provides a larger contact surface for faster stripping. High-strength fiber resists fragmentation and performs well on edges.
• Resists the pacional for a systematic cutting action.
• High speed and low vibration rating

TECHNICAL DATA

WHAT TYPE OF WORK IS IT APPROPRIATE FOR

• Cleaning the weld and removing thick layers of rust, depressions caused by oxidation, thick layers of paint, corrosion and discoloration of welds
• Commonly used in high pressure applications such as cutting and weld removal, it cuts aggressively, removing thick layers of rust, paint and corrosion without leaving marks, while preparing the base material.

SAFETY AND STORAGE CONDITIONS

Store under recommended conditions of (16-26°C / 35-50% rH) with a “first in – first out” rotation. Temperature and humidity conditions outside these ranges should be avoided. Note: The shelf life of the product may be reduced if the original packaging is not properly closed or if the product is stored in an environment with high temperature or humidity.

Safety: Please observe all local safety regulations and industry standards. Always use appropriate Personal Protective Equipment (PPE) and follow the safety precautions indicated on the associated product safety insert.

These product security inserts are included with the product sent and can also be found online in www.3M.com This product must always be used on tools with a guard and the fiberglass support plate must not be damaged as this may cause injury.

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.