Non-woven disc 115 mm x 22 mm Clean & Strip XT PRO purple XO-RD X Basto (1 pcs) 3M

Non-woven disc 115 mm x 22 mm Clean & Strip XT PRO purple XO-RD X Basto (1 pcs) 3M. The Scotch-Brite Clean and Strip XT Pro Disc features a silicon carbide abrasive mineral incorporated into an open nylon mesh. Our discs effectively remove rust, paint, scale, coatings and adhesives from surfaces without significantly altering the base material.

Get greater conformability without compromising strength when preparing metal surfaces or removing rust and paint with the Scotch-Brite Clean and Strip XT Pro Disc.

Our discs feature a combination of redesigned fiber, resin and silicon carbide abrasive mineral that form a thick, open mesh.
Thanks to the spring-like behavior of the fibers, these discs are able to follow the contours of the workpiece with greater precision, achieving a larger contact area with faster removal rates.

Confirm in advance with Sekureco.eu delivery date approx.

CHARACTERISTICS

• Removes rust, paint, scale and metal coatings quickly
• High-strength fiber resists fragmentation and performs well on edges High conformability provides a larger contact surface for faster stripping
• Silicon carbide mineral cuts aggressively and leaves a fine finish Resists fouling for consistent cutting action
• High speed, low vibration and low spark rating

• They conform to weld bead corrugations to polish welds without removing them, and also allow you to access hard-to-reach areas without damaging the substrate.
• Silicon carbide cuts aggressively to a fine finish.
• Unwanted burrs, stains and contaminants are effectively removed while maintaining workpiece geometry; All of this reduces the need for repeat work and helps increase productivity.
• Additionally, the mesh holes allow chips to escape, preventing clogging of the abrasive.
• To ensure a consistent cut over the life of the abrasive, the disc's reinforcing resin bond gradually breaks down with use to reveal new fibers and a super-sharp silicon carbide abrasive.
• High-strength fiber resists fragmentation and performs well on edges. These discs also offer low vibration and spark, high speed and long life.

Diameters

Diameters:

50.8, 76.2mm and 100mm RolocTM TR

115 and 180mm TN Quick Change

115 and 180mm Type 27

115, 125 and 180mm Type 27 Quick Change

100mm with mounting shaft

100mm RolocTM+

100 x 6.35mm, 150 x 12.7mm, and with central hole

SPECIFICATIONS

BENEFITS

• Removes rust, paint, calamine and metal coatings quickly.
• High-strength fiber resists fragmentation and performs well on edges.
• High conformability provides a larger contact surface for faster stripping.
• Silicon carbide mineral cuts aggressively and leaves a fine finish.
• Resists the pacional for a systematic cutting action.
• High speed, low vibration and low spark rating

TECHNICAL DATA

WHAT TYPE OF WORK IS IT APPROPRIATE FOR

• Rust removal, paint removal, calamine removal, coating removal, adhesive removal and surface preparation
• Ideal for low pressure applications

SAFETY AND STORAGE CONDITIONS

Store under recommended conditions of (16-26°C / 35-50% rH) with a “first in – first out” rotation. Temperature and humidity conditions outside these ranges should be avoided. Note: The shelf life of the product may be reduced if the original packaging is not properly closed or if the product is stored in an environment with high temperature or humidity.

Safety: Please observe all local safety regulations and industry standards. Always use appropriate Personal Protective Equipment (PPE) and follow the safety precautions indicated on the associated product safety insert. These Product Safety inserts are included with the shipped product and can also be found online at www.3M.com This product must always be used on tools with a guard and the fiberglass support plate must not be damaged as this may cause injury.

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.