Surface Conditioning deburring disc SE-DH 150 mm x NH, A CRS without hole Grade A Coarse (20 units) 3M

For the purposes of this Regulation, the following definitions shall apply: 3M. What. The Surface Conditioning Scotch-Brite disc is a non-woven and durable disc for use as the first step in cleaning, homogenising, shaving and finishing. Our discs perform well on contoured or uneven surfaces without reducing or damaging the base material.

The products 3M SE Surface conditioning are non-woven abrasives with reinforced mesh. What. Used to peel, tint and polish metal.

For demanding shaving, sanding, grinding and finishing work, use the Surface Conditioning SE disc 3MTM Scotch-BriteTM with aluminium oxide abrasive. Aluminium oxide is the preferred choice among industry professionals for its high cutting rate and long service life. It is a resistant and durable abrasive that fractures itself continuously during use to expose fresh cutting edges continuously: this differentiates it from traditional abrasives such as garnet, which wear quickly with use. It also has low heat retention and is ideal for roughing, sanding and finishing.

Our aluminum oxide disc is suitable for use on a wide variety of substrates for both wood and metallurgical work, including iron alloys. Scotch-Brite industrial abrasives are single-surface conditioning products on non-woven nylon or synthetic fibres. The combination of abrasives with fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open mesh material works without heating and resists embossing, which limits fiber jams to maintain the high cutting performance of abrasive minerals.

See also for the purposes of this Regulation, the following definitions shall apply:

Confirm in advance with Sekureco.eu date of supply approx.

CHARACTERISTICS

• Uniformly distributed aluminium oxide abrasives offer a high cutting rate and a consistent finish.
• Our surface conditioning discs use aluminum oxide abrasive, the preferred choice among industry professionals for its quick cutting and long service life.
• The abrasive is resistant and durable, and fractures itself during use to expose fresh cutting edges continuously to make cutting more effective: this differentiates it from traditional abrasives such as garnet, which wear quickly with use.
• Aluminum oxide ore is strong and durable, and has a high cutting rate and low heat retention.
• Scotch-Brite industrial abrasives are single-surface conditioning products that mix abrasives with non-woven nylon or synthetic fibres to create an abrasive system that delivers consistent results over the life of the product.
• The open mesh material works without heating and is anti-slip, which limits fiber jams to maintain the high cutting performance of abrasive minerals.

BENEFITS

• The variety of grains and sizes of abrasives provide an ideal starting point for cleaning, finishing, homogenization and fine shaving.
• The open mesh material operates without heating and resists molding, so it offers a long operating time.
• The adaptive disc conditions surfaces without scratching, marking or damaging the base material.
• Hookit placement system to change the disc quickly and easily in multi-step finishing processes

TECHNICAL DATA

WHAT KIND OF WORK IS APPROPRIATE

• Our quick-cut Surface Conditioning Scotch-BriteTM disc is the ideal first step in cleaning, homogenizing, shaving and finishing.
• It is widely used for grinding, sanding and finishing a wide variety of substrates in both woodworking and metallurgy, including iron alloys.
• Ideal for metal, composites, plastics and other materials

SAFETY AND STORAGE CONDITIONS

Store in the recommended conditions of (16-26°C / 35-50% rH) with a rotation “ first in – first out”. Temperature and humidity conditions outside these ranges should be avoided. Note: The shelf life of the product may be reduced if the original packaging is not properly closed or if the product is stored in a high temperature or humidity environment.

Safety: Please take into account all local safety regulations and industry standards. Always wear appropriate Personal Protective Equipment (PPE) and follow the safety precautions set out in the associated product safety data sheet. These Product Safety Data Sheets are included with the product and can also be found online at www.3M.com This product should always be used on guarded tools and the fiberglass support plate should not be damaged as it may cause injury.

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.