443SA 75mm No Hole Finishing Abrasive Disc, P1000, 50413 No Hole Trizact Hookit 3M

443SA Finishing Abrasive Disc, 75mm- 100mm, No Holes, P1000, 50413 Trizact Hookit 443SA No Holes 3M. Ensure durability and even wear during sanding with the disc 3M™ Trizact™ Hookit™ 443SA.

Get a uniform sanding finish thanks to the disc 3M™ Trizact™ Hookit™ 443SA Our disc guarantees durability and homogeneous wear thanks to its exclusive pyramid design of several layers of fine grade abrasive mineral particles.

Our abrasive disc provides a uniform finish thanks to its unique pyramid design of multiple layers of fine grade abrasive mineral particles.

Supply: 5 to 10 business days

CHARACTERISTICS

• Ideal for fine sanding of panels before roughing or applying varnish.
• Suitable for manual and machine work.
• The flexible design guarantees moldability and achieves a quality and uniform matte finish.
• The discs have a pyramidal structure containing several layers of fine grade abrasive mineral particles.
• It is always used wet with dust extraction disabled.
• Fixation System 3M Hookit™ for secure attachment

SPECIFICATIONS

DESCRIPTION AND END USES

Finishing discs 3M 443SA Trizact are abrasive discs with a revolutionary structure to be used on paint or varnish to prepare the surface before blending or polishing. These discs have triangular or pyramidal block structures with several layers of fine-grained abrasive mineral. As the abrasive elements wear away, the sharp mineral is continually exposed.

The result is a smooth and homogeneous finish, with excellent durability. The finish obtained is approximately 2 microns, which facilitates the adhesion of the paint to the scratched surface without the scratches being visible again.

Application areas:

1) Preparation of a varnish by machine, around a repair in a large area, for small areas, by hand.

2) Scratches in hard-to-reach areas and bumpers on hand.

3) Use in polishing applications as a large area smoothing product before using P3000 Trizact.

4) Use by hand to remove imperfections in the base coat during the painting process, to remove imperfections after application of said coat.

BENEFITS

• Get a uniform sanding finish thanks to the disc 3M™ Trizact™ Hookit™ 443SA Our disc guarantees durability and homogeneous wear thanks to its exclusive pyramid design of several layers of fine grade abrasive mineral particles.
• Our abrasive disc provides a uniform finish thanks to its unique pyramid design of multiple layers of fine grade abrasive mineral particles.

TECHNICAL DATA

WHAT TYPE OF WORK IS IT APPROPRIATE FOR

The disc 3M™ Trizact™ Hookit™ 443SA is used to remove and refine sanding scratches before using the polishing system 3M™ Perfect-it™.

INSTRUCTIONS FOR USE

For machine use: Use a fine action D/A sander (5 or 3 mm orbit) with a Hookit backing pad.

Use a soft sanding pad (PN 05774) to achieve a more uniform matte.

Dampen the area with a little water using a spray bottle. Also moisten the face of the disc. The disc should not be used dry.

Do not use solvents or water-based degreasers.

Do not soak it in a bucket of water.

Apply medium pressure sanding to the area to tone the surface.

To see if complete matting has been achieved, clean and dry the surface.

For hand use: use with sanding pads 05791 or 05792.

Again, moisten the surface to be matted using even pressure.

STORAGE

It is recommended that all coated abrasive products be stored at constant temperature and humidity levels, between 18 and 22°C and between 50% and 65% relative humidity. They should be kept away from damp (or cold) walls, windows or floors to avoid possible moisture absorption. Likewise, storage near heat sources such as steam pipes, radiators, hot air ducts, ovens, etc. should be avoided. The best way to store the product is in its original packaging until it is ready to be used. Storage life is unlimited under these conditions.

SECURITY

Safety Whenever possible, sanding should be carried out in a well-ventilated area and it is strongly recommended that appropriate glasses, dust masks and gloves be worn. Discs should only be used on machines with a suitable backing plate, specifically designed and well maintained at all times. The abrasive discs must be symmetrically arranged and must not protrude more than 2 mm from the outer edge of the support plate.

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.