Motorized hydraulic press with fixed cylinder WPP 50 M

Heavy and solid for workshops, on a pedestal, with electric pump and double-acting cylinders for professional use.

· Robust frame with holes for adjusting the pressing table.
· Pressure reading on the pressure gauge.
· Automatically switching, at idle, from accelerated to slower piston operating speed.
· With double effect cylinder.

Intended use

The hydraulic column presses for workshops WPP 50 M are intended for use in mechanical workshops of the automotive industry and machinery construction.
It is ideal for pressing and pressure adjustment of bearings, bushings, shafts and bolts, and for pressure polishing, bending and punching work. Hydraulic power is created by an electric pump. The workshop press is easy to handle. The height of the table is regulated mechanically by means of a winch.
The workshop press is a machine driven by a hydraulic system with an integrated electric motor. The tool shall only be used and operated as described below in these instructions.
It shall not be modified, manipulated or used for any purpose other than that intended. Only persons who have been instructed and trained in the use and maintenance of these machines shall operate the workshop press

Capacity 50 T.
Height (A) 2.290 mm
Width without pump (B) 985 mm
For the purposes of this Regulation, the following definitions shall apply:
Pass width int. (D) 790 mm
Structural Fund. perf. (E) 210 mm
Minimum or maximum altitude. a width of 65 / 1,050 mm
Piston stroke (G) 250 mm
Width with pump (H) 1.350 mm
Pump width (H) 350 mm
Slow forward 1.7 mm/sec
Fast forward 20 mm/sec
Engine power 1,5 kW / 400 V
Net weight 420 kg

Type of WPP 50 M
Technical data
Compression force max. (t) 50
Weight ((kg) 420
Electrical data
Voltage ((V) 400
Engine power (kW) 1,5
Power supply cable (mm2) 5 x 1,5 mm2
Hydraulic system
Pressure (bar) 400
For the purpose of this Regulation, the following definitions shall apply:
For the purposes of this Regulation, the following definitions shall apply:
Flow rate (l/min) 16 / 1.2
Tank capacity (l) 30
Tube capacity including cylinder (l) 18
Action
Height (mm) 2290
Width (mm)
985 without pump
Depth (mm) 650
Width of pump (mm) 350
Intermediate step width (mm) 790
Depth of perforated frame (mm) 210
Height of step (mm) min. 65
max . 1050
Movement of plunger (mm) 250
Environmental data
Temp. for transport/storage between 0 °C and 40 °C
Temp. 0 °C to 40 °C