No transport of people sign (text and pictogram) COFAN

UV ink sign with text and pictogram that prohibits the transport of people in vehicles intended for heavy cargo or loading and unloading of goods. The sign clearly indicates theprohibition of carrying people in any area of the vehicle, to avoid injuries or accidents in work areas.

It is common to find this type ofprohibition signsIn industry in general, but especially in sites for loading and unloading goods, warehouses or warehouses, and the production industry, as well as in the pharmaceutical and food industries

It is important to follow the instructions of this type of signs, due to general company regulations; In turn, these notices seek to guide workers and users to avoid workplace accidents

Among the most common technical characteristics of obligation signs with COFAN UV inks are:

• Shape:It is usually a circle with a pictogram and text
• Size:May vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to warn about dangerous behavior
• Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.

GLASSPACK PVC SIGN: DESCRIPTION

The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

• MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

ADHESIVE PVC SIGN (STICKER)

Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl

The color coating is applied to it using silk-screen techniques.

The adhesive is protected against the elements by a transparent gloss calendered laminate.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

Description:

• TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
• COLOR LAYEREPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
• SELF-ADHESIVE VINYL0,08 mm made of white PVC resin. Back side of the adhesive.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Gloss-finished, high optical quality compressed PVC backing especially suitable for printing using screen printing techniques with UV curing inks in offset

SELF-ADHESIVE MONOMERIC VINYL SUPPORT

Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.

Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.

COLOR LAYER INKS

Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.

Mixture of oligomers, monomers, photoinitiators and pigments.

The ink contains the following dangerous elements:

• Hexamethylene diacrilate

• Isobornyl acrylate

• Oxybis diacrilate (methyl-2,1-estanodiilo)

• 1-Vinilhexahidro-2H-Azepin-2 -ona

DIMENSIONS (MM)

Polystyrene

148 x 105mm

210 x 148mm

297 x 210mm

420 x 297mm

Adhesive sticker

148 x 105mm

210 x 148mm

297 x 210mm

APPLICATIONS

These types of signals can be found in risk environments such as:

Civil works

Deposits

Logistics

Urban works

Factories and heavy machinery, etc

INSTALLATION / LOCATION / SIGN PLACEMENT

Check our blog to know how to install a signal or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.

TheFIXEDThe signaling element must be carried out on a firm and free surface.

The signal can be secured byMechanical elements(screws, rivets, etc...) orADHESIVES(Assembly adhesive, queues, silicones ...) carefully, avoiding dirty view or deformation of it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.

For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.

The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.

WARRANTY

Sekureco offers in this product the legal guarantee of 2 years collected in Law 23/2003, of July 10, on guarantees in the sale of consumer goods.

NORMATIVE

In ISO 7010 2012 - Graphic symbols and colors for safety signals for accident protection, fight against fire and emergency evacuations.

ABOUT COFAN

Cofan: A company with over 15 years' experience in the hardware sector, industrial supply, and in the manufacture of safety footwear and other personal protective equipment.