Gas boiler sign, the passage of people outside the SEKURECO service is prohibited

Gas boiler sign, the passage of people outside the SEKURECO service is prohibited. The sign is made with UV inks and can be installed indoors and outdoors. It is available in three different materials and in several sizes to choose from

A gas boiler is a device used to heat water or produce steam through the combustion of natural gas or another type of gas. Gas boilers are commonly used in centralized heating systems and domestic hot water production in homes and commercial buildings.

Among the most common technical characteristics of the obligation signals with sekureco inks are:

• Shape:It is usually a circle with a pictogram and text
• Size:May vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to warn about dangerous behavior
• Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.

GLASSPACK PVC SIGN: DESCRIPTION

The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

• MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

ADHESIVE PVC SIGN (STICKER)

Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl

The color coating is applied to it using silk-screen techniques.

The adhesive is protected against the elements by a transparent gloss calendered laminate.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

Description:

• TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of sign.
• SELF-ADHESIVE VINYL0.08 mm made of white PVC resin. ADHESIVE back side.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with offset UV curing inks

SELF-ADHESIVE MONOMERIC VINYL SUPPORT

Monomeric calendered cast digital printable vinyl sheet (80µ) glossy white self-adhesive.

Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, to later be lifted and repositioned if necessary (a characteristic is lost when excessive pressure is exerted).

COLOR LAYER INKS

Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.

Mixture of oligomers, monomers, photoinitiators and pigments.

The ink contains the following dangerous elements:

• Hexamethylene diacrylate

• Isobornyl acrylate

• Oxybis(methyl-2,1-ethanediyl) diacrylate

• 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

VINYL ADHESIVE

100x150mm

150x200mm

200x300mm

PVC GlaSPack 0’7 mm

210 x 300 mm

300 × 400mm

ALUMINUM 0.5 MM

210 x 300 mm

300 × 400mm

APPLICATIONS

These types of signals can be found in environments such as:

Commercial buildings

Homes

Healthcare industry

INSTALLATION / LOCATION / SIGN PLACEMENT

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be placed on a firm surface free of dirt.

The signal can be secured byMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(assembly adhesive, glues, silicones...) carefully, avoiding soiling the visible surface or deforming it.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.

For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.

The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.

WARRANTY

SEKURECO offers on this product the 2-year legal guarantee included in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

NORMATIVE

EN ISO 7010 2012 - Graphic symbols and colors for safety signs for accident protection, fire fighting and emergency evacuations.

ABOUT SEKURECO

Occupational security experts! We are a young company that arises in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety and in the absence of a company specialized in the sector. It offers a win of more than 10,000 products specialized in labor protection, available to companies and individuals, the best brands and the most competitive prices in the market