€0.78 (no TAX)
No truck parking sign, with SEKURECO UV inks
Truck Parking Prohibited Sign With UV Inks.
€0.78 (no TAX)
No truck parking sign, with SEKURECO UV inks. There are different places where truck parking can be prohibited, for example: In residential areas where a special permit is required to park. In areas near hospitals, schools or places with a high concentration of people. In exclusive lanes for public transport or bicycles. In loading and unloading areas. In places where construction or maintenance work is carried out on public roads. It is important to check traffic signs and local regulations to know exactly where parking is prohibited.
Improves the safety of your workplace warning of the hazard or dangers thanks to these panels that clearly indicate the nature of the danger thanks to a symbol and an explicit color.
Danger sign "No Truck Parking" that warns and informs to prevent trucks from traveling through places where it is prohibited or where access is difficult.
CHARACTERISTICS
- Made of materials:
- PVC glasspack 0.7mm
- Vinyl Adhesive (Sticker)
- 0.5mm aluminum
- Flexible or adhesive laminated polyester hazard signs.
- Easy to install.
- Available in different sizes to suit all your needs.
- Not photoluminescent.
- EN-ISO 7010 standard.
- UV drying inks with great adhesion and resistance. Allows great flexibility in the final product
- Not self-flaming. Not toxic.
- Self-extinguishing.
MEASURES
The signage plates are made as defined in Annex III of RD485/1997, both in their intrinsic characteristics and in the type of sign.
The size of the square makes it visible from 9.30 meters away in its A4 size and 13.4 meters away in its A3 size (according to the formula published in the TECHNICAL GUIDE supporting RD 485/1997).
PVC GLASSPACK 0.7 mm
- RD41040..............300X400
- RD40040..............210X300
VINYL STICKERS
- RD40640..............200X300
- RD45640..............150X200
ALUMINUM 0.5 mm
- RD41940..............300X400
- RD40940..............210X300
*This measurement is served with perforated corners
Among the most common technical characteristics of the obligation signals with sekureco inks are:
- Shape:It is usually a circle with a pictogram and text
- Size:May vary depending on the size and location of the work area.
- Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to warn about dangerous behavior
- Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.
GLASSPACK PVC SIGN: DESCRIPTION
The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
- MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
- COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.
ADHESIVE PVC SIGN (STICKER)
Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl
The color coating is applied to it using silk-screen techniques.
The adhesive is protected against the elements by a transparent gloss calendered laminate.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
Description:
- TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
- COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of sign.
- SELF-ADHESIVE VINYL0.08 mm made of white PVC resin. ADHESIVE back side.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with offset UV curing inks
TECHNICAL DATA |
||
|
TESTING METHOD |
TYPICAL VALUE |
Tolerance of the thickness |
|
> 300£ 400 µm ± 5% |
Density |
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Spot of softening VICAT (1kg / in oil / as samples stacked) |
ISO 306-A50 |
83± 2 °C |
Spot of softening VICAT (5kg / in oil / as samples stacked) |
ISO 306-A50 |
74 ± 2°C |
Strain to the traction |
ISO 527 -1/-2 |
45± 3N/mm2 |
Deformation to the traction |
ISO 527 -1/-2 |
5± 1% |
Spot of creep |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Spot of breakage |
ISO 527 -1/-2 |
> 80% |
Proof of impact |
ISO 8256 |
> 500 kJ/m2 |
Deformation to the impact |
ISO 8256 |
11 ± 2 mm |
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SELF-ADHESIVE MONOMERIC VINYL SUPPORT
Monomeric calendered cast digital printable vinyl sheet (80µ) glossy white self-adhesive.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, to later be lifted and repositioned if necessary (a characteristic is lost when excessive pressure is exerted).
TECHNICAL DATA |
||
PROPERTIES |
TESTING METHOD |
TYPICAL VALUE |
Material |
|
Vinyl calendered monomeric |
Finish |
|
White glow |
Thickness |
Micrometer Federal Bench |
80 µm |
Guy adhesive |
|
Acrylic base water |
Adherence |
Peelability FTM 1 (180º) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application |
|
Dry |
Elongation |
FTM 14 |
The 0.5 mm |
Range of temperature of application |
|
-50°C to +90°C |
Guy of substrates |
|
Aluminum, Glass, PMMA, PC, ABS, Paint |
COLOR LAYER INKS
Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.
These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.
Mixture of oligomers, monomers, photoinitiators and pigments.
The ink contains the following dangerous elements:
• Hexamethylene diacrylate
• Isobornyl acrylate
• Oxybis(methyl-2,1-ethanediyl) diacrylate
• 1-vinylhexahydro-2H-azepin-2-one
DIMENSIONS (MM)
VINYL ADHESIVE
100x150mm
150x200mm
200x300mm
PVC GlaSPack 0’7 mm
210 x 300 mm
300 × 400mm
ALUMINUM 0.5 MM
210 x 300 mm
300 × 400mm
APPLICATIONS
These types of signals can be found in risk environments such as:
Civil works
Urban conditioning
Renovations
Factories and heavy machinery, etc
STORAGE, CLEANING AND CONSERVATION
The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.
The optimal storage temperature will be between 15º C and 25º C; and with a humidity of 10/50%.
Cleaning methods; avoid applying abrasive products. It is recommended to clean them with water and neutral detergents.
INSTALLATION / LOCATION / SIGN PLACEMENT
Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.
TheFIXATIONThe signaling element must be placed on a firm surface free of dirt.
The signal can be secured byMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(assembly adhesive, glues, silicones...) carefully, avoiding soiling the visible surface or deforming it.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.
For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.
The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.
WARRANTY
SEKURECO offers on this product the 2-year legal guarantee included in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.
NORMATIVE
EN ISO 7010 2012 - Graphic symbols and colors for safety signs for accident protection, fire fighting and emergency evacuations.
- UNE 53127:2002 - Determination of combustion characteristics.
- RD 485/1997 - On safety signage.
- RD 486/1997 - On safety in workplaces.
- CTE - Technical Building Code.
- RSCIEI - Fire safety regulations in industrial buildings.
- Law 31/1995 - On prevention of occupational risks.
- SEKURECO SIGNS ARE MANUFACTURED WITH A UNE-EN ISO 9001 CERTIFIED QUALITY MANAGEMENT SYSTEM
ABOUT SEKURECO
Experts in workplace safety! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety and due to the lack of a company specialized in the sector. It offers more than 10 thousand products specialized in labor protection, available to companies and individuals, from the best brands and at the most competitive prices on the market.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@