Maximum speed signal 30 km/h, with UV inks SEKURECO

Maximum speed signal 30 km/h consisting of text and pictogram, with UV inks. Both the text and the pictogram indicate that there is a signal indicating the maximum speed allowed in that stretch of the road, and that that speed is 30 units (kilometers per hour).

The "maximum velocity" message is the technical thermal that refers to the highest speed allowed in a given area, and is usually indicated by traffic signals. The speed limit is set on various areas or stretches of the road, according to local rules to set a permitted limit speed and thus guarantee the safety of the spaces

Among the most common technical characteristics of prohibition signals with SEKURECO UV inks are:

• Form:Usually a circle with a pictogram and text
• Size:Can vary depending on the size and location of the work area.
• Colours:Security signals use specific colors to communicate your message. The red color is used for prohibition signals and alerting on dangerous behaviors
• The material:Safety signs may be made of different materials, such as plastic, aluminium or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or moisture, it is advisable to use a material resistant to these conditions.

SEÑAL GLASSPACK PVC: DESCRIPTION

The signs ofGLASSPACKOf0,7 mmConsist of a semi-rigid polymer base (PVC) with a bright white finish to which color coating and protection is applied by screen printing techniques.

Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.

• SOPORTE:A glass pack of 0,7 mm (semi-rigid PVC) of a bright white colour.
• COLOR CAPA:For use in the manufacture of products falling within heading No 8542:. Colour black, green, red, blue, yellow, orange depending on the signal typeBRILLANT, PROTECTION OF SEÑAL AGAINST UV RAYS.

SEÑAL PVC ADHESIVO (PEGATINA)

The signs are manufactured on a self-adhesive white gloss calendered monomeric vinyl sheet

Color coating is applied using serigraphic techniques.

The adhesive is protected against inclement weather by a glossy transparent calendered laminate.

Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.

Description of the vehicle:

• LAMINATE TRANSPARENT BRILLIANT FINISHOf 0,8 mm. Transparent film of CALANDRED PVC with MONOMERIC PLASTIFICANT, free of cadmium, with UV filter.
• COLOR CAPAEPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
• VINILO AUTOADHESIVO0,08 mm made of white PVC resin. Back side of the adhesive.

SEMIRRÍGIO PVC SOPORT - GLASSPACK

Pvc support finished gloss, high optical quality especially suitable for printing using serigraphic techniques with UV curing inks in offset

SOPORTE VINILO MONOMÉRICO AUTOADHESIVO

Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.

Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.

COLOR CAPA TINTES

Color layer (according to signal requirements) by serigraphic inks of cured by means of UV radiation of polyvalent use on various plastics.

It is inks with glossy finish, whose mixture of compounds and radiated healing method gives it an excellent elasticity and reactivity, not only in overprint if not also in the face of the bend and the skeleton.

Mixtures of oligomers, monomers, photoinitiators and pigments.

Ink contains the following dangerous elements:

• Hexametylene diacrylate

• Isobornil acrylate

• Oxybis diacrylate (methyl-2,1-ethanoediyl)

• 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

PVC GLASSPACK 0’7mm 300 x 400 mm

PVC 3mm 600x800mm

PVC BLANCO 3mm 800x1200mm

APPLICATIONS

This type of signal can be found in environments such as roads and crossings, parking and other vehicle entry and exit sites

INSTALATION / EMPLACEMENT / SERIAL COLOCATION

Check our blog to learn how to install a sign or sign: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To properly place an obligation sign indicating that gloves are compulsory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye level and in a place where it cannot be obstructed by other objects or signals.

TheFIJATIONThe signalling element must be placed on a firm surface free from dirt.

The signal may be secured by:MECHANIC ELEMENTS(screws, rivets, etc.) orADHESIVOS(mounting adhesive, glues, silicones, etc.) carefully, avoiding dirt on the visible surface or deformation of the surface.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signalling systems have been designed, SEKURECO recommends that signals be kept free from dust, dirt or any residue or object that prevents their visibility and identification.

For cleaning it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the signal.

The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.

GARANTIA

SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, on Guarantees in the Sale of Consumer Goods.

NORMATIA

EN ISO 7010 2012 - Graphical symbols and colors for safety signs for accident protection, fire control and emergency evacuations.

ON SEKURECO

They're occupational safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and safety at work and the lack of a company specialized in the sector. It offers a range of more than 10 000 specialized products for occupational protection, available to companies and individuals, of the best brands and at the most competitive prices on the market.