Retention system with light plus 2 harness IRUDEK Roque Nublo

Brand:

In the case of vehicles of categories N1 and N2 with a maximum mass not exceeding 2000 kg:

COMPONENTSThe following:

1 LIGHT HARNESS PLUS 2

2 MUSKETS REF. OTHER

1 SEMISTATIC CONNECTION ROPE 1,5M REF. OTHER

1 BAG OF NET

Read moreShow less
€61.65
€61.65 (TAX incl.)
€50.95 (no TAX)
Reference:
100908400005

SHIPMENTS

from 3,99€ + VAT. Free from €150 +VAT

EXCHANGES AND RETURNS

Free up to 14 days after purchase, excluding personalized and made-to-order products

EXCHANGES AND RETURNS

WE HELP YOU

+34 876 43 01 24
[email protected]

You may also like
Description

Restraint system with 1 light harness plus 2, has 2 muskets ref. 981, 1 semistatic connection cord 1.5m ref. 10150 and 1 net bag.

HARNESS LIGHT PLUS 2

CHARACTERISTICS

  • Other, of circular cross-section
  • For the purposes of this Regulation, the following definitions shall apply:
  • Extension tape
  • Adjustable on legs
  • This Regulation shall be binding in its entirety and directly applicable in all Member States

TECHNICAL DATA

  • Weight: 750 g
  • For the purpose of this Regulation, the following definitions shall apply:
  • Rings resistance: 22 kN
  • Tape width: 44 mm
  • Load: 140 kg

MATERIALS

  • Tape: polyester
  • Yarn: High strength polyamide
  • Rings: Steel
  • Manufacture from materials of any heading

IT 'S A STEELSAFE 981

CHARACTERISTICS

Steel connector with screw-type manual closure

TECHNICAL DATA

  • Weight: 174 g
  • Aperture: 18 mm
  • Locking: Screw-Lock
  • Resistance: 25 kN
  • Shelf life: Unlimited

MATERIALS

Body made of steel

Head: steel

CONNECTING CORD CONNECTION 150

CHARACTERISTICS

  • Semi-static rope for making connections over them or using them as fasteners.
  • Since they do not include an energy absorber, they cannot be used as an anti-fall system

TECHNICAL DATA

  • Length: 1.5 m
  • Weight: 186 g
  • Resistance: > 22 kN
  • Shelf life (years): 10
  • Diameters and widths:

MATERIALS

Rope: Polyamide

Manufacture from materials of any heading

PACKAGING KIT

  • Unit/ box: 20
  • Packing length: 32 cm
  • Packing width: 14 cm
  • Height of packaging: 13 cm

APPLICATIONS

Harnesses and components used as anti-roll system.

The use of the mooring element with an anti-rolling subsystem shall be compatible with the instructions for use of each component of the system and with the standards: EN 355, EN 361, EN 362.
Indicated for work at heights, it is therefore often used in work environments such as:
  • Civil works
  • Construction industry
  • Mountaineers
  • Industry as a whole

STANDARDS AND REGULATIONS

  • IN361
  • IN 362
  • IN 354

ATTENTION

- A fall harness is the only acceptable body restraint that can be used in a fall harness.
- The fallprotection system must be connected only to the harness connection points marked with the capital letter “A”. The identification A/2 indicates that it is necessary to connect simultaneously two disconnection points with the same identification. It is prohibited to connect the protective system to a single connection point identified by A/2”.
- In harnesses with a built-in belt, the positioning equipment must be connected only to the belt's lateral anchorage rings.
- Connection to the anchorage point and to other equipment must be made via muskets in accordance with EN 362:2004.
- For use with EN 353-1:2014+A1:2017, EN 353-2:2002, it is recommended to connect the equipment to the front anchorage point of the harness. For use with EN 355 energy absorbers or EN 360 anticides it is recommended to connect the harness dorsal anchorage device.
- Before each use of personal protective equipment, it should be checked carefully to ensure that it is in working order and functioning properly.
- During the pre-use check it is necessary to carefully inspect all equipment elements to verify that they show no signs of deterioration, excessive wear, corrosion, abrasion, degradation by UV radiation, cutting or incorrect use. Pay particular attention to tapes, seams, anchorages, buckles and regulating elements.

MAINTENANCE INSTRUCTIONS

- CLEANING: Personal protective equipment must be cleaned in such a way as not to cause adverse effects on the materials used in its manufacture. Textile and plastic materials (tape, rope) clean with a cotton cloth or brush. Do not use any abrasives. For thorough cleaning, wash the equipment at a temperature between 30°C and 60°C using a neutral detergent. For metal parts, use a damp cloth. If the equipment gets wet, either from use or cleaning, let it dry naturally away from direct heat.
- STORAGE: Personal protective equipment should be stored in a loose package in a dry,ventilated place, protected from sunlight, ultraviolet rays, dust, sharp-edged objects, extreme temperatures and harsh substances.

ABOUT IRUDEK

Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.

Read moreShow less
Product Details
100908400005

heading

@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
☆☆☆☆☆ ★★★★★ (@COMMENT_GRADE@)
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_TITLE@

@COMMENT_COMMENT@

@COMMENT_IMAGES@
@COMMENT_VIDEOS@
Write a comment
@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_COMMENT@

Reply
@COMMENT_AVATAR@

@CUSTOMER_NAME@

@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@
@COMMENT_DATE@
@COMMENT_NO_APPROVE@

@COMMENT_COMMENT@

Reply

Menu