Español 
Français 
Deutsch 
Português PT 
€58.32
€58.32
(TAX incl.)
€48.20 (no TAX)
€48.20 (no TAX)
Light plus harness 4 connecting rope.
English GBRetention system kit with light plus 4 adjustable IRUDEK Teide Light harness
Brand:
The vehicle shall be fitted with a light harness plus 4 adjustable IRUDEK Teide Light. With semi-static tightening rope.
COMPONENTS:
1 LIGHT HARNESS PLUS 4
2 MUSKETS REF. OTHER
1 SEMISTATIC CONNECTION ROPE 1,5M REF. OTHER
1 BAG OF NET
€97.38
€97.38
(TAX incl.)
€80.48 (no TAX)
€80.48 (no TAX)
Reference:
100908400004
SHIPMENTS
from 3,99€ + VAT. Free from €150 +VAT
EXCHANGES AND RETURNS
Free up to 14 days after purchase, excluding personalized and made-to-order products
You may also like
€61.65
€61.65
(TAX incl.)
€50.95 (no TAX)
€50.95 (no TAX)
In the case of vehicles of categories N1 and N2 with a maximum mass not exceeding 2000 kg:
COMPONENTSThe following:
1 LIGHT HARNESS PLUS 2
2 MUSKETS REF. OTHER
1 SEMISTATIC CONNECTION ROPE 1,5M REF. OTHER
1 BAG OF NET
€83.41
€83.41
(TAX incl.)
€68.93 (no TAX)
€68.93 (no TAX)
Fall-proof system with harness, muskets and connecting ropes.
COMPONENTS:
1 LIGHT HARNESS PLUS 5
2 MUSKETS REF. OTHER
1 SEMISTATIC CONNECTION ROPE 1,5M REF. OTHER
1 BAG OF NET
Restraint system with light harness plus 4, 2 muskets with threaded fastener ref. It's 981. It has a 1.5m semi-static connection rope ref. 10150 and a net bag.
HARNESS LIGHT PLUS 4
CHARACTERISTICS
- Other, of circular cross-section
- Anchor D” side anchors for positioning
- Textile sternal anchorage for fall protection + textile lining (A/2)
- Adjustable on thighs
- Extension tape
TECHNICAL DATA
- Weight: 1,25 kg
- For the purpose of this Regulation, the following definitions shall apply:
- Rings resistance: 22 kN
- Tape width: 44 mm
- Load: 140 kg
MATERIALS
- Tape: polyester
- Yarn: High strength polyamide
- Rings: Steel
- Manufacture from materials of any heading
IT 'S A STEELSAFE 981
CHARACTERISTICS
- Other, of circular cross-section
- Other, of circular cross-section
TECHNICAL DATA
- Weight: 174 g
- Aperture: 18 mm
- Locking: Screw-Lock
- Resistance: 25 kN
- Shelf life: Unlimited
MATERIALS
Body made of steel
Head: steel
CONNECTING CORD CONNECTION 150
CHARACTERISTICS
- Semi-static rope for making connections over them or using them as fasteners.
- Since they do not include an energy absorber, they cannot be used as an anti-fall system
TECHNICAL DATA
- Length: 1.5 m
- Weight: 186 g
- Resistance: > 22 kN
- Shelf life (years): 10
- Diameters and widths:
MATERIALS
Rope: Polyamide
Manufacture from materials of any heading
PACKAGING KIT
- Unit/ box: 10
- Packing length: 31 cm
- Packaging width: 19 cm
- Height of packaging: 12 cm
APPLICATIONS
Harnesses and components used as anti-roll system.
The use of the mooring element with an anti-rolling subsystem shall be compatible with the instructions for use of each component of the system and with the standards: EN 355, EN 361, EN 362.Indicated for work at heights, it is therefore often used in work environments such as:
- Civil works
- Construction industry
- Mountaineers
- Industry as a whole
STANDARDS AND REGULATIONS
- IN361
- IN 362
- IN 354
ATTENTION
- A fall harness is the only acceptable body restraint that can be used in a fall harness.- The fallprotection system must be connected only to the harness connection points marked with the capital letter “A”. The identification A/2 indicates that it is necessary to connect simultaneously two disconnection points with the same identification. It is prohibited to connect the protective system to a single connection point identified by A/2”.
- In harnesses with a built-in belt, the positioning equipment must be connected only to the belt's lateral anchorage rings.
- Connection to the anchorage point and to other equipment must be made via muskets in accordance with EN 362:2004.
- For use with EN 353-1:2014+A1:2017, EN 353-2:2002, it is recommended to connect the equipment to the front anchorage point of the harness. For use with EN 355 energy absorbers or EN 360 anticides it is recommended to connect the harness dorsal anchorage device.
- Before each use of personal protective equipment, it should be checked carefully to ensure that it is in working order and functioning properly.
- During the pre-use check it is necessary to carefully inspect all equipment elements to verify that they show no signs of deterioration, excessive wear, corrosion, abrasion, degradation by UV radiation, cutting or incorrect use. Pay particular attention to tapes, seams, anchorages, buckles and regulating elements.
MAINTENANCE INSTRUCTIONS
- CLEANING: Personal protective equipment must be cleaned in such a way as not to cause adverse effects on the materials used in its manufacture. Textile and plastic materials (tape, rope) clean with a cotton cloth or brush. Do not use any abrasives. For thorough cleaning, wash the equipment at a temperature between 30°C and 60°C using a neutral detergent. For metal parts, use a damp cloth. If the equipment gets wet, either from use or cleaning, let it dry naturally away from direct heat.- STORAGE: Personal protective equipment should be stored in a loose package in a dry,ventilated place, protected from sunlight, ultraviolet rays, dust, sharp-edged objects, extreme temperatures and harsh substances.
ABOUT IRUDEK
Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.
heading
Ficha Técnica Ficha Técnica Kit de sistema de retención con arnés light plus 4 ajustable IRUDEK Teide Light download
Declaración de Conformidad 981 Cumple con los requisitos del Reglamento/ Directiva de Equipos de Protección Individual (EPI) download
Declaración de Conformidad Nexion 150 Cumple con los requisitos del Reglamento/ Directiva de Equipos de Protección Individual (EPI) download
Declaración de Conformidad Light Plus 5 Cumple con los requisitos del Reglamento/ Directiva de Equipos de Protección Individual (EPI) download
Manual de Usuario Cuerdas de Conexión Leer atentamente las instrucciones de uso antes de utilizar el elemento de amarre download
Manual de Usuario Conectores Leer atentamente las instrucciones de uso antes de utilizar el conector download
Manual de Usuario Arneses Leer atentamente las instrucciones de uso antes de utilizar el arnés download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@