Retractable fall arrest block cable 25-28 m - EN 360 (ref. CR300)

• • Molded housing made of high impact-resistant polymer, to prevent breakage and is virtually indestructible.

  • With galvanized steel wire of a diameter of 4 mm and fitted with a rotating hook (AZ002AS aperture 24 mm). Avoid undue rotation of the strap during use or in the event of a fall.

  • It complies with EN 360.

  • Maximum user weight: 140 kg.
  • The test shall be carried out in accordance with the specification of the manufacturer.

This product cannot be cancelled or returned.

----------------------------------------------------

Work at height requires a large number of safety and protection devices to prevent workers who are forced to perform this type of activity from falling to another level, which is the main risk of their work activity. The Personal protective equipment they must be appropriately certified and in perfect condition to enable the operator to carry out his work with the greatest possible protection. In addition to appropriate work clothing, different essential elements must be used within the other, with retractable devices being widely used in a large number of situations within work at height. In our shop you can find different models such as In the case of vehicles equipped with a retractable landing gear: .

The In the case of vehicles equipped with a retractable landing gear: is an element made of a high-strength polymer molded housing to be resistant to possible impact and breakage, with a 4 mm galvanized steel wire fitted with a rotating hook. It complies with EN 360 and the maximum user weight is 140 kg.

Retractable devices are devices that have an automatic locking function as well as an automatic tensioning and retracting mechanism of the mooring element, which deforms a retractable mooring element. Different models exist so that a tailored option can be found depending on the needs of each job and activity.

This type of safety device is in all cases designed to be used by a single person at the same time, bearing in mind that it is also not permitted to connect another sling or rope to the retractor unless expressly authorised by the manufacturer in the product documentation or on the label.

Prevention in work at height is essential, since a fall protection system is made up of different components that must be tested to ensure that they work perfectly and that the worker can have maximum assurance that they will not fail while performing his work. It is also important that all components of these systems are always accompanied by their documentation and information, in addition to having to bear the CE marking.

The retractor shall be anchored to a fixed or movable point with a load resistance of 12 kN.