Colorless protective glasses with black green frame, anti-scratch 3M

MATERIALS

Box

Other

Foam insert

Foam

SPECIFICATIONS

EN 166:2001, approved by the EC

Range of eye protection

Comfort

Recommended industry

Agriculture

Mark on the eyelid

2C- 1.2 3M 1 FT

Marking

SecureFitTM

Material of the lens

Polycarbonate

Mounting material

Plastic

Coating of eyelids

Anti-rust and anti-fouling

Product series

400

Type of product

Safety glasses

Type of seal

Not Seal

REGULATION AND CERTIFICATION

Approved by EC, EN 166:2001

These series of safety glasses have been shown to meet the essential health and safety requirements set out in Annex II to Regulation (EU) 2016/45 and therefore bear the CE marking. The European certification service ECS GmbH, located at Huettfeldstrasse 50, 73430 Aalen, Germany and with notified body number 1883, has examined these products at the design stage. These products have been tested and CE marked according to EN166:2001.

MARKED

These products have been demonstrated to comply with the requirements of EN 166:2001 and associated standards and are therefore marked as follows:

2C- 1.2 3M 1 FT

In the case of vehicles of categories M1 and N2

UV protection with good colour recognition (2C). This product meets the requirements of this standard and provides protection against the specified UV range (210 nm 365 365 nm)

5-1.7, 5-2, 5-2.5 and 5-3.1
(IN 1994) [con enmiendas])

Protection against glare as required by the standard; provides protection against the specified UV range (280 nm 350 350 nm)

1

Optical class 1, suitable for use all day.

F

Protection against high speed, low energy particle impacts (45 m/s)

T

Tested impact protection under extreme temperature conditions (up to -5 °C and +55 °C)

K

Resistance of the surface to damage by fine particles

N

Anti-fouling

+1,5

+2,0

+2,5

Increasing capacity (diopters)

AREAS OF USE AND APPLICATION

These products are intended to protect against high-speed, low-energy (F) particulate matter under extreme temperature conditions between -5 °C and +55 °C (T), in accordance with EN166:2001. They also protect against UV radiation according to standard EN170:2002 (colorless and amber lenses) and sun glare according to standard EN172:1994 (grey, I/O and blue mirror lenses).

These products are suitable for a wide variety of uses and sectors, such as:

• Construction
• Engineering
• Production lines
• Inspection work
• Maintenance and repair work

ABOUT 3M

3M it has solutions so diverse that they have the right answer for every need. And if not, they work alongside the customer to develop that new way of doing things. This different way of thinking is shown in studies developed to find the most optimal product for each organization.