High-end harness with automatic buckles IRUDEK Gravity plus 1

Fall harness with identification tag with back and front guard and ring in 361

It has adjustable y” back design plus folded shoulder straps. With belt buckle

a. side anchorage rings in358

(b). v-ring in 813

The GRAVITY PLUS antibody harness has a belt for a ventral blocker, and a belt for an irudek krow ventral blocker. It has automatic k-speed buckles, antislip system technology and extra adjustment tapes

CHARACTERISTICS

High-end fall harness. It can be used for all types of work, being suitable for hanging or rope access work. It has the following rings:

- Aluminium dorsal and thoracic fall guard

- Aluminium seat belt

- 2 side rings of aluminium for positioning

The Gravity plus 2 harness is manufactured over the Irupad belt with Holetech breathable fiber. Its specifically profiled design makes comfort and breathability unmatched. It has adjustable straps on the shoulders, back and legs (high and wide). Automatic K-Speed fast-closing buckles on belt and legs. 2 rings and hermetic brackets.

The anti-slip system: exclusive adjustment system at the ends of the tapes. Thanks to the new piece of silicone, it's possible to take the tape out and adjust it effortlessly, and then reinsert it into your Velcro roll so that no tape is left hanging.

TECHNICAL DATA

• Weight: 2.3 Kg
• Belts: Irupad
• Antislip system: Yes
• Back height adjustment: Yes

PACKAGING DATA

Weight: 2830 grams

Unit/box: 1

MATERIALS

• Manufacture from materials of any heading, except that of the product
• Rings: Aluminium
• Tape: polyester
• Manufacture from materials of any heading
• For the purposes of this Annex:

SIZE GUIDE

A

S-M: 50-60

I-XL: 55 TO 80

B

S-M: 90- 145

I-XL: 100 TO 160

C

S-M: 55 TO 75

I-XL: 55 TO 85

* Measurements in centimetres

STANDARDS AND REGULATIONS

IN361, IN358, IN813

RESTRICTIONS ON USE

The equipment must be attributed individually to one person.

- It is recommended that the anchorage point where the anti-fall system will be fixed be above the user. The anchorage point shall have a minimum static resistance of 12 kN (metal) or 18 kN (textile) and shall comply with the requirements of EN 795:1996 / EN 795:2012.

- Personal protective equipment should not be worn by persons whose state of health could affect the safety of the user under normal conditions of use or in an emergency.

- Personal protective equipment should only be used by a person trained and competent in its safe use.

ATTENTION

- A fall harness is the only acceptable body restraint that can be used in a fall harness.

- The fallprotection system must be connected only to the harness connection points marked with the capital letter “A”. The identification A/2 indicates that it is necessary to connect two connection points with the same identification. It is forbidden to connect the protective system to a single connection point identified as A/2”.

- In harnesses with a built-in belt, the positioning equipment must be connected only to the belt's lateral anchorage rings.

- Connection to the anchorage point and to other equipment must be made via muskets in accordance with EN362:2004.

- For use with EN 353-1:2014+A1:2017,EN 353-2:2002 it is recommended to connect the equipment to the front anchorage of the harness. For use with EN 355 energy absorbers or EN 360 anti-roll, it is recommended to connect the equipment to the harness dorsal anchorage point. - Before each use of personal protective equipment, it must be checked carefully to ensure that it is in working order and functioning properly.

- During the pre-use check it is necessary to carefully inspect all equipment elements to verify that they show no signs of deterioration, excessive wear, corrosion, abrasion, degradation by UV radiation, cutting or incorrect use. Pay particular attention to tapes, seams, anchor rings, buckles and deregulation elements.

ABOUT IRUDEK

Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.