€262.17 (no TAX)
Lifting and positioning harnesses for medium grey refineries 3M DBI-ROOM
Lifting and positioning harnesses for medium grey refineries 3M THE DBI-SALA. four and a half pounds. Front and rear rings in D.
€840.16 (no TAX)
Lifting and positioning harnesses for medium grey refineries 3M IT 'S DBI-SALA . Rising and positioning harness for refineries 3M DBI-SALA ExoFit NEX is comfortable, durable and specifically designed for use in this sector. This safety harness, made of lightweight materials, helps you work efficiently and effectively.
This harness, designed specifically for refinery workers, includes a removable seat sling with aluminum dashboard and lightweight aluminum D-rings that allow you to position and sit comfortably to reduce fatigue. It has front and rear D-rings made of lightweight aluminum. Confirm in advance with Sekureco.eu date of supply approx.
CHARACTERISTICS
- This safety harness has a D-ring extension of 45 cm, a belt with padding and a removable rigid seat with D-rings for positioning at work.
- Integrated suspension anti-trauma belts provide a continuous loop to relieve pressure on the wearer's body after a fall and minimize suspension trauma.
- The reflective material integrated into the legs, chest, shoulders and back improves visibility in low light.
- The belts repel water to keep it dry by preventing mold and dirt from accumulating.
- These abrasion-resistant belts are durable and can withstand the most demanding everyday conditions.
- Revolver vertical adjusters provide a simple and quick adjustment to the torso straps, eliminating loose cables and avoiding their mismatch
- Impact indicators make it easier to check for damage to the harness and help ensure its safe use.
- The housing for the sling hook is easy to open to avoid the risk of tripping.
- The removable seat sling with aluminum dashboard and lightweight aluminum D-rings allow you to position and sit comfortably on the harness to reduce fatigue.
- Covered identification tags help protect important information during the life of the harness.
BENEFITS
- This harness, designed specifically for refinery workers, includes a removable seat sling with aluminum dashboard and lightweight aluminum D-rings that allow you to position and sit comfortably to reduce fatigue.
- Front and rear D-rings made of lightweight aluminium.
- D-ring extension made of lightweight aluminium.
- Security housing with easy opening for hooks.
- Water-repellent and abrasion-resistant lint that stays dry and strong.
- The Revolver Adjuster provides quick and easy vertical adjustment on the torso.
- Integrated belt connection for drill towers (used with drill tower belt KB01000570, sold separately).
- Integrated anti-trauma suspension straps.
- Integrated reflective materials.
- Identification tags are covered.
- Impact indicators make it easier to check for damage to the harness and help ensure its safe use.
APPLICATIONS
This harness, designed specifically for refinery workers.
Work comfortably and safely with refinery lifting and positioning harness 3M It's called the ExoFit NEX.
TECHNICAL DATA
Quantity by box | 1 |
Chest Buckle material | Zinc Plated Steel |
Body belt | I did |
Product colour | Grey |
D-ring placement | Back with Extension, Front, Suspension |
Recommended industry | Oil and gas |
Highlights | DBI-ROOM |
Material of the torso buckle | Zinc Plated Steel |
Weight | 4,3 kg |
Product series | It's called DeltaTM, ExoFit NEXTM |
Type of product | Positioning/ascension harnesses for the oil and gas sector |
Location of padding | Back/Hip, Shoulder/Back and Leg |
Improved lines: Abrasion resistant and water repellent to reduce mold and dirt generation.
Housing for the hook of the sling: Avoid having to carry the sling in the hand when not in use.
Comfort pillows: On the underside of shoulder, hip and leg straps. TM® Harness 3M DBI-ROOM
Other, of circular cross-section Lightweight aluminium alloy buckles for quick and easy connections. (There are also models with passing buckle).
Vertical back ring in D: The vertical D-ring ensures quick, easy and secure connections to your fall arrest system. Rigid belt: Allows to carry 27 kg of unbroken tools. Protected labels: Harness labels protected by coupling and fastening.
INSTRUCTIONS FOR USE - ADJUSTMENT OF THE FALL GUARD
Before we start. Empty your pockets, as during work or, more importantly, in the event of a fall, items you carry in your pockets can get caught between the harness straps and the wearer's body, causing injury. Always consult the instructions for use supplied with the specific harness for correct installation and fitting.
Step one. What. Let's get started. Hold the harness by the D-ring, which is often held through a D-pad, and make sure the straps are not twisted.
Step two. What. You run for the shoulders. Slide the harness over your arms and place it over your shoulders. Make sure no straps are entangled and that they hang freely.
Step three. What. You run for your legs. Place it between your legs and hold the leg strap on your left side. Lift the strap between the legs and connect it to the buckle on the left side. Connect the strap for the right leg using the same procedure.
Step four. What. Chest marks. Attach the breast strap buckle to the corresponding opposite side buckle.
Step five. What. A belt (if you have one). Attach the belt buckle to the corresponding opposite side buckle.
Step six. What. Adjust the harness so it's tight. Adjust the shoulder straps until they are tight with the adjusters. The left and right sides of the shoulder straps should fit to the same length and the breast strap should be centered at the bottom of the chest, about 15 cm below the shoulder. The D pectoral ring of the vest type harness moves up or down adjusting the shoulder and leg straps. Center the D-ring between the shoulder blades. Note: In the applicable models the D-ring can be raised or lowered on the harness strap as necessary to achieve a correct fit. Rearrange the leg straps so they're tight. They shall be at least 8 cm from the strap beyond the buckle on the leg straps. Adjust the belt for the waist (if fitted).
It's ready! A properly fitted and fitted full-body harness will effectively distribute impact forces throughout the body and provide adequate restraint during suspension and rescue after a fall.
REGULATORY
EN 813: Personal protective equipment for preventing falls from height.
EN 358: 2001 - Personal protective equipment for restraint in working position and preventing falls from height.
EN 361:2003 - Personal protective equipment against falls from a height. Machinery for making pulp of fibrous cellulosic material
ABOUT 3M
3M Fall Protection, part of the Personal Protective Products division of 3M, has earned a reputation as experts in safe work at height with our market-leading innovations and high-performance rescue and fall protection solutions. The ultimate protection against falls. What. For more than 75 years, workers at heights around the world have relied on DBI-SALA® products to get their jobs done and home safely. Today, 3M Fall Protection continues that proud tradition by offering high-quality DBI-SALA® fall protection solutions, enabling workers to do their jobs better in a safe and comfortable way.
heading
Certificado Punto delantero y trasero para detención de caídas (EN361) download
Manual de Usuario Instrucciones generales de uso y mantenimiento download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@