copy of Adjustable Antarctic harness with padded Irupad IRUDEK Wind Blue 4

The IRUDEK Wind 4 Pro harness is designed to provide maximum safety and comfort in high-rise jobs. Its advanced features make it the ideal choice for demanding professionals.

CHARACTERISTICS

• Dorsal anticed and textile sternal anchor: Optimal lightness and safety.
• Aluminium side rings: Precise positioning.
• K-EASY automatic buckles: Fast and secure fit.
• Adjustable belts: Perfect fit in height, waist and bolts.
• Plastic protections at the ends: Increased durability.
• Textile rings on shoulders: Secure vertical equations.
• Textile binding rings: Uniform distribution of loads.
• WINDBOARD Dorsal Plate: Protecting from scratches.
• XPE EVA padding and RIPSTOP tissue: Comfort and resistance.
• ELDU portaganchos: Automatic release.
• ANTISLIP SYSTEM: Keeps the tapes in place.
• Chip NFC Ready: Traceability and Product Review.

TECHNICAL DATA

• Weight: 2150 grs
• Capacity of use: 140 kg
• Width tape: 44 mm
• Useful life (years): 10 years of use + 2 storage

EMBALAJE DATA

Weight: 2150 grs

Units/box: 1

MATERIALS

• Tape: polyester
• Hilo: Polyamide
• Rings: Aluminium
• Automatic buckles: Steel

WALLS GUIDE

A

S-M: 45-70

L-XXL: 45-100

B

S-M: 90-130

L-XXL: 100-155

D

S-M: 150-185

L-XXL: 175-210

* Measurements in centimetres

STANDARDS/NORMATIA

EN361 I EN 358 I EN 1497

USE LIMITATIONS

The equipment must be attributed individually to a person.

- It is recommended that the anchor point where the anticated system will be fixed be above the user. The anchor point must have a minimum static resistance of 12 kN(metal) or 18 kN (textile) and must be in accordance with the requirements of the Standard EN 795:1996 / EN 795:2012.

- The individual protection team should not be used by those persons whose health status may affect the security of the user in normal or emergency conditions.

- Individual protection equipment should only be used by a trained and competent person in their safe use.

ATTENTION

- An anticated harness is the only acceptable body prension device that can be used in an anticed system.

- The anticated protection system should be connected only to the connection points of the harness that carry an identification with the upper “A” letter. The “A/2” identification indicates that it is necessary to connect two disconnected points with the same identification. It is forbidden to connect the protection system to a single connection point that is identified with “A/2”.

- In the harnesses with built-in belt, the connection to the team for positioning work should be made only to the side anchors of the belt.

- The connection to the anchor point and other equipment must be made through muskets according to EN362:2004.

- For use with anticated EN 353-1:2014+A1:2017,EN 353-2:2002 it is recommended to connect the equipment to the front anchor point of the harness. For use with EN 355 or EN 360 energy absorbers it is recommended to connect the equipment to the dorsal anchor point of the harness. - Before each use of the individual protection team, you have to check it carefully to ensure that it is in use and works properly.

- During pre-use check, it is necessary to carefully review all equipment elements to verify that they do not have impairment, excessive wear, corrosion, abrasions, UV radiation degradation, use incorrections. Pay special attention to ribbons, sewings, anchor rings, buckles and regulation elements.

ON IRUDEK

Irudek Group is a group of expanding companies with headquarters in Spain, implantations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is security and warranty, supported by years of experience and customers who have placed their trust in their products.