Particulate mask without valve 9320+ Aura FFP2 NR D folded (5 masks) 3M

The brand's 9320 mask 3M it is a type FFP2 respiratory protection mask that complies with European regulations EN 149:2001+A1:2009. This mask is designed to protect the wearer from non-volatile solid and liquid particles in the air, and has a minimum filtration efficiency of 94%.

The 9320+ mask is made with a high-quality filter material that consists of three layers. The outer layer is moisture resistant and protects the mask from dirt and damage. The middle layer is a high-efficiency filter material that traps airborne particles. The inner layer is soft and comfortable against the skin, allowing for prolonged use without causing irritation.

This mask is suitable for use in a wide variety of work and professional environments, such as the food industry, construction, mining, agriculture and cleaning, among others. It can also be used by healthcare personnel, for example, in hospitals and healthcare centers.

It is important to note that the 9320 mask should not be used in environments containing toxic gases or vapors, nor for protection against viruses. In the latter case, the use of a mask with higher filtration efficiency, such as an FFP3 mask, is recommended.

In short, the brand's 9320+ mask 3M is an FFP2 mask designed to protect the user from non-volatile solid and liquid particles in the air. It is made from high quality materials and is suitable for a wide variety of work and professional environments. It is important to follow the manufacturer's instructions and use the mask according to the recommendations for use to ensure its effectiveness.

Valveless Particulate Respirator with Aura FFP2 NR D Folded (5 Masks) 3M .The FFP2 Mask 3M Aura 9320 provides comfort and design without compromising its effectiveness. Protects against low concentrations of dust and mists common in a wide variety of industrial applications and other situations where FFP2 protection is required.

Made of sweat-absorbing material. - Gentle contact to the face
Very compatible with glasses, minimizing fogging. 3M Advanced Design Filter Material

CHARACTERISTICS

• Folded
• Patented three-panel design.
• Improves communication and efficiency thanks to its three-panel design.
• It is carried and stored more easily due to its individual and lightweight packaging.
• Its comfort and aesthetics do not compromise its effectiveness. Nose Clip
• Made of sweat-absorbing material. - Gentle contact to the face
• Very compatible with glasses, minimizing fogging. 3M Advanced Design Filter Material
• High filtration efficiency combined with low breathing resistance. 3M High Ventilation Valve
• The innovative VAV valve reduces discomfort, allowing exhaled air to escape from the mask and preventing heat buildup inside. Fastening bands
• The material of the clamping bands adapts to any head size for an effective adjustment without increasing the voltage.
• Color code indicating the level of protection. Individual packaging
• Hygienic individual packaging that protects the mask from any contamination before use
• Unit sales price
• Easily carried and stored in the workplace.

DESCRIPTION

BENEFITS

• FFP2 NR D disposable mask that protects against solid and/or non-volatile liquid particles (EN 149:2001+Ai:2009 classification)
• High performance filter material 3M, which facilitates breathing, reducing resistance and increasing user comfort
• Innovative 3-panel design: adapts to faces of different shapes and sizes allowing greater facial movement during conversation. This makes it much more comfortable to carry and easy to store when not in use
• With individual packaging: hygienic packaging that protects the mask from any contamination before use. Easily carried and stored before use
• Embossed top panel Reduces the flow of hot, humid air exhaled through the top panel, helping to reduce the formation of fog on eye protectors
• Headband Holds the respirator firmly in place, helping to create a proper and comfortable seal, with blue color coding to indicate performance level: FFP2 according to EN 149:2001+A1:2009
• Individual packaging Hygienic packaging helps protect the mask from breathing before use, allows for convenient storage and distribution in the workplace
• Compatible with: Eye protection 3M, hearing protection 3M

MATERIALS

The components of the masks are made with the following materials:

• Adjustment bands: Polyisoprene
• Staples: Steel
• Nose pad: Polyurethane
• Nose clip: Aluminum
• Filter: Polypropylene
• Valve*: Polypropylene
• Valve diaphragm*: Polyisoprene

These products do not contain components made from natural rubber latex.

Maximum weight of products:

• If valve (9310+ and 9320+) = 10g
• With valve (9312+, 9322+ & 9332+) = 15g

* Only models 9312+, 9322+ and 9332+

STANDARDS/ REGULATIONS

These products meet the requirements of the European standard EN 149:2001 + A1:2009, self-filtering masks for particles.

These masks offer protection against solid and non-volatile liquid particles.

These products are classified according to their filtration efficiency and their inward leakage value (FFP1, FFP2 and FFP3), also according to their use time and resistance to saturation. The tests included in this standard include filter penetration, tests after storage, flammability, breathing resistance and internal leakage. Reusable masks must also reflect care instructions and mandatory storage and saturation performance tests (saturation testing is optional for disposable masks). You can purchase a copy of the EN 149:2001 A1:2009 standard through AENOR.

Designation:

• R = Reusable
• NR = Non-reusable (only one work shift)
• D = Complies with the saturation test

APPROVALS

These products meet the requirements of European Directive 89/686/CEE, Personal Protective Equipment Directive (in Spain, R.D. 1407/1992) and therefore, they have CE marking

Certification under Article 10, EC Type Examination and Article 11, EC Quality Control, has been issued by BSI Product Services, Maylands Avenue, Hemel Hempstead, HP2 4SQ, Great Britain (Notified Body number 0086).

APPLICATIONS

These masks are suitable for use at maximum non-volatile solid and liquid particle concentrations of:

Reference      Classification EN 149 A1     Exhalation valve       VLA

9320                 FFP2 NR D                         Without valve                 12

Respiratory protection is only effective if selected, donned, and used correctly and when worn for the entire duration of exposure to contaminants.

STORAGE AND TRANSPORTATION

Particle masks 3MTM AuraTM 9300+ have a shelf life of 5 years. The expiry date is stated on the carton. Before you start using them, check that the product is within its shelf life. The product should be stored in a clean, dry place in a temperature range of – 20°C to + 25°C at a relative humidity < 80%. Use the original packaging to store and transport the product.

HOW TO DISPOSE OF THE PRODUCT

Contaminated products should be disposed of in accordance with local hazardous waste laws.

INSTALLATION INSTRUCTIONS

Before putting on the mask, make sure your hands are clean.

It is important to note that the mask should be replaced when it becomes wet or dirty, or after continuous use of 8 hours. In addition, it is recommended not to use the mask for more than one day and not to share it with other people.

1. With the back of the mask facing up and using the tab on the bottom panel, unfold the mask separating the top and bottom edges, opening them to a cup shape. Slightly bend the center of the nose clip.

2. Make sure both edges are fully extended

3. Hold the mask in one hand with the open edges facing your face. Grasp both adjustment bands with your other hand. Place the mask under your chin, with the nose clip facing up, and pull the adjustment straps over your head.

4. Place the upper adjustment band on the crown of your head and the lower adjustment band on your neck, below your ears. The bands should not be twisted. Adjust the top and bottom edge for comfort, making sure they are not folded

5. Using both hands, mold the nose clip around your nose (bottom) to ensure a good fit and seal. Shaping the clip with one hand may result in a less effective fit.

6. Check the fit before entering the contaminated area.

FIT CHECK

1. Cover the front of the mask with both hands, taking care not to distort the fit of the mask.

2. (a) Masks WITHOUT VALVE - EXHALE forcefully;

(b) Masks WITH VALVE - INHALE forcefully.

3. If leakage is noticed around the nose, readjust the nose clip to eliminate the leak. Repeat the fit check.

4. If you notice leaks around the edges, replace the adjustment bands on both sides of the head to eliminate the leak. Repeat the fit check.

If YOU CANNOT get a proper fit, DO NOT enter the contaminated area. Contact your supervisor.

“Fit-Test” tests are mandatory in some countries.

For more information regarding “Fit-Test” fit tests, please contact 3M.

VIDEOS

ABOUT 3M

3M it has such diverse solutions that have the appropriate response to each need. And if this is not the case, they work together with the client to develop that new way of doing things. This different way of thinking is shown in the studies developed to find the most optimal product for each organization.