Obligation sign Goods only, text only COFAN
Only goods, only COFAN text
Size to choose.
Manufacture from materials of any heading
€4.91 (no TAX)
The obligation sign text Only is made of vinyl adhesive polystyrene and is available in two different sizes. This sign is used to indicate that elevators or areas of buildings are for exclusive use for goods, that is, they are not suitable for transporting people.
The text is white with a blue background, it is fully visible and alerts people not to use these spaces intended only for merchandise. In the case of drivers, the sign is used to indicate that the transport of goods is only allowed in a certain area or road. This sign is commonly used in areas where there are traffic restrictions for private vehicles, such as in industrial zones or loading and unloading areas. Using this sign indicates that drivers must ensure that they only transport goods and not people in that area
Among the most common technical characteristics of COFAN obligation signs are:
- Shape: it is usually text and pictogram
- Size:May vary depending on the size and location of the work area.
- Colors:Safety signs use specific colors to communicate their message. The color blue is commonly used to indicate that the use of personal protective equipment is mandatory.
- Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material that is resistant to these conditions.
GLASSPACK PVC SIGN: DESCRIPTION
The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
- MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
- COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.
ADHESIVE PVC SIGN (STICKER)
Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl
The color coating is applied to it using silk-screen techniques.
The adhesive is protected against the elements by a transparent gloss calendered laminate.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
Description:
- TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
- COLOR LAYEREPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
- SELF-ADHESIVE VINYL0,08 mm made of white PVC resin. Back side of the adhesive.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with offset UV curing inks.
TECHNICAL DATA |
||
PROPERTIESYES |
TEST METHOD |
TYPICAL VALUE |
Tolerance of the thickness |
|
> 300£ 400 µm ± 5% |
Density |
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Spot of softening VICAT (1kg / in oil / as samples stacked) |
ISO 306-A50 |
83± 2 ° C |
Spot of softening VICAT (5kg / in oil / as samples stacked) |
ISO 306-A50 |
74 ± 2°C |
Strain to the traction |
ISO 527 -1/-2 |
45± 3N/mm2 |
Deformation to the traction |
ISO 527 -1/-2 |
5± 1% |
Spot of creep |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Spot of breakage |
ISO 527 -1/-2 |
> 80% |
Proof of impact |
ISO 8256 |
> 500 kJ/m2 |
Deformation to the impact |
ISO 8256 |
11 ± 2 mm |
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SELF-ADHESIVE MONOMERIC VINYL SUPPORT
Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.
TECHNICAL DATA |
||
PROPERTIES |
TEST METHOD |
TYPICAL VALUE |
Material |
|
Vinyl calendered monomeric |
Finish |
|
White glow |
Thickness |
Micrometer Federal Bench |
80 µm |
Guy adhesive |
|
Acrylic base water |
Adherence |
Peelability FTM 1 (180º) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application |
|
Dry |
Elongation |
FTM 14 |
The 0.5 mm |
Range of temperature of application |
|
-50°C to +90°C |
Guy of substrates |
|
Aluminum, Glass, PMMA, PC, ABS, Paint |
COLOR LAYER INKS
Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.
These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.
Mixture of oligomers, monomers, photoinitiators and pigments.
The ink contains the following dangerous elements:
• Hexamethylene diacrilate
• Isobornyl acrylate
• Oxybis diacrilate (methyl-2,1-estanodiilo)
• 1-Vinilhexahidro-2H-Azepin-2 -ona
DIMENSIONS (MM)
297X210 mm
420X297 mm
APPLICATIONS
This obligation sign is frequently installed in general industrial workplaces. They are usually located on walls at a considerable height that is easy to read and appreciate by users, therefore, they are frequently installed in establishments such as:
- Floors
- Production workshops
- Industries
- Factories
- Hospitals
- Crossroads and streets
INSTALLATION / LOCATION / SIGN PLACEMENT
Check our blog to know how to install a signal or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.
TheFIXEDThe signaling element must be carried out on a firm and free surface.
The signal can be secured byMechanical elements(screws, rivets, etc...) orADHESIVES(Assembly adhesive, queues, silicones ...) carefully, avoiding dirty view or deformation of it.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.
For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.
The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.
NORMATIVE
The UNE 23035-4 regulation of December 2003 requires signs to have certain qualities of light intensity and resistance to pigment attenuation. Both the inks and the Photoluminescent PVC used in the creation of our signs largely comply with these regulations. Because safety signage can help save lives, and is mandatory, use the best signage possible. Recommendations for Use: Minimum sizes to use depending on the meters.
WARRANTY
Sekureco offers in this product the legal guarantee of 2 years collected in Law 23/2003, of July 10, on guarantees in the sale of consumer goods.
ABOUT COFAN
Cofan: A company with over 15 years' experience in the hardware sector, industrial supply, and in the manufacture of safety footwear and other personal protective equipment.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@