€4.56 (no TAX)
Obligation sign It is Mandatory to Use Gloves with UV inks SEKURECO
Obligation sign It is Mandatory to Use Gloves, with SEKURECO UV inks
Pictogram in accordance with the European standard UNE EN ISO 7010:2019.
€0.76 (no TAX)
It's asignalIndicating that it isthe use of glovesAnd is used to tell people to wear gloves to protect themselves from potential safety or health risks in different areas of work and industries. The poster is made of resistant vinyl adhesive. Meanwhile, the blue color is commonly used to indicate that the use of personal protective equipment is mandatory.
The text indicates that it is necessary to use gloves in a certain situation or activity and thus avoid direct contact with dangerous or contaminating substances, to protect hands from cuts, burns, abrasions, etc.
Among the most common technical characteristics of obligation signals with SEKURECO UV inks are:
- Form:It is usually a circle with a blue edge and a white pictogram that represents a hand with a glove.
- Size:Can vary depending on the size and location of the work area.
- Colours:Security signals use specific colors to communicate their message. Blue is commonly used to indicate that personal protective equipment is compulsory.
- The material:Safety signs may be made of different materials, such as plastic, aluminium or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or moisture, it is advisable to use a material resistant to these conditions.
SEÑAL GLASSPACK PVC: DESCRIPTION
The signs ofGLASSPACKOf0,7 mmConsist of a semi-rigid polymer base (PVC) with a bright white finish to which color coating and protection is applied by screen printing techniques.
Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.
- SOPORTE:A glass pack of 0,7 mm (semi-rigid PVC) of a bright white colour.
- COLOR CAPA:For use in the manufacture of products falling within heading No 8542:. Colour black, green, red, blue, yellow, orange depending on the signal typeBRILLANT, PROTECTION OF SEÑAL AGAINST UV RAYS.
SEÑAL PVC ADHESIVO (PEGATINA)
The signs are manufactured on a self-adhesive white gloss calendered monomeric vinyl sheet
Color coating is applied using serigraphic techniques.
The adhesive is protected against inclement weather by a glossy transparent calendered laminate.
Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.
Description of the vehicle:
- LAMINATE TRANSPARENT BRILLIANT FINISHOf 0,8 mm. Transparent film of CALANDRED PVC with MONOMERIC PLASTIFICANT, free of cadmium, with UV filter.
- COLOR CAPAEPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
- VINILO AUTOADHESIVO0,08 mm made of white PVC resin. Back side of the adhesive.
SEMIRRÍGIO PVC SOPORT - GLASSPACK
Pvc support finished gloss, high optical quality especially suitable for printing using serigraphic techniques with UV curing inks in offset
TECHNICAL DATA |
||
PROPERTIESS |
METHOD OF PRUEBA |
VALUE TÍPICO |
Tolerance of the thickness
|
|
▪ 300£ 400 Of which: ± 5% |
Density
|
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Point of softening VICAT
1 kg / in oil / as samples stacked) |
ISO 306-A50 |
83 ± 2 °C |
Point of softening VICAT
5 kg / in oil / like samples stacked) |
ISO 306-A50 |
74 ± 2 °C |
Stress a the traction
|
ISO 527 -1/-2 |
45 ± 3 N/mm2 |
Deformation a the traction
|
ISO 527 -1/-2 |
5 ± 1% |
Point of fluency
|
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Point of breaking
|
ISO 527 -1/-2 |
▪ 80 percent |
Trial of impact
|
ISO 8256 |
▪ 500 kJ/m2 |
Deformation the impact
|
ISO 8256 |
11 ± 2 mm |
Absorption of water
|
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SOPORTE VINILO MONOMÉRICO AUTOADHESIVO
Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.
TECHNICAL DATA |
||
PROPERTIES |
METHOD OF PRUEBA |
VALUE TÍPICO |
Materials
|
|
Manufacture from materials of any heading calendered monomeric |
Finished
|
|
White brightness |
Thickness
|
Micrometer Federal Bench |
80 Of which: |
Kind of of adhesive
|
|
Manufacture from materials of any heading base water |
Adherence
|
Pellability FTM 1 (180o) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application
|
|
Dry |
Elongation
|
FTM 14 |
The 0.5 mm |
Rank of temperature of
application
|
|
-50°C a +90°C |
Kind of of substrate
|
|
Aluminium, Glass, PMMA, PC, ABS, Painting |
COLOR CAPA TINTES
Color layer (according to signal requirements) by serigraphic inks of cured by means of UV radiation of polyvalent use on various plastics.
It is inks with glossy finish, whose mixture of compounds and radiated healing method gives it an excellent elasticity and reactivity, not only in overprint if not also in the face of the bend and the skeleton.
Mixtures of oligomers, monomers, photoinitiators and pigments.
Ink contains the following dangerous elements:
• Hexametylene diacrylate
• Isobornil acrylate
• Oxybis diacrylate (methyl-2,1-ethanoediyl)
• 1-vinylhexahydro-2H-azepin-2-one
DIMENSIONS (MM)
PVC GLASSPACK 0'7 mm
210 x 300 mm
300 x 400 mm
ADHESIVOS DE VINILO
150 x 200 mm
100 x 150 mm
200X300 mm
ALUMINIO 0'5 mm
210 x 300 mm
300 x 400 mm
PVC BLANCO 3 mm
600 x 800 mm
800 x 1200 mm
APPLICATIONS
This type of signal can be found in a wide range of environments, from factories to hospitals, laboratories and offices. These signals can be used to indicate that the use of gloves is mandatory to protect from potential safety or health risks, such as contact with hazardous chemicals or exposure to pathogenic microorganisms
They are usually located on walls at a considerable height that is easy to read and appreciate by users, often installed in establishments where some physical and health risk activity is performed
INSTALATION / EMPLACEMENT / SERIAL COLOCATION
Check our blog to learn how to install a sign or sign: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To properly place an obligation sign indicating that gloves are compulsory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye level and in a place where it cannot be obstructed by other objects or signals.
TheFIJATIONThe signalling element must be placed on a firm surface free from dirt.
The signal may be secured by:MECHANIC ELEMENTS(screws, rivets, etc.) orADHESIVOS(mounting adhesive, glues, silicones, etc.) carefully, avoiding dirt on the visible surface or deformation of the surface.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signalling systems have been designed, SEKURECO recommends that signals be kept free from dust, dirt or any residue or object that prevents their visibility and identification.
For cleaning it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the signal.
The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.
GARANTIA
SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, on Guarantees in the Sale of Consumer Goods.
ON SEKURECO
They're occupational safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and safety at work and the lack of a company specialized in the sector. It offers a range of more than 10 000 specialized products for occupational protection, available to companies and individuals, of the best brands and at the most competitive prices on the market.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@