Safety sign with UV inks It is Mandatory to Use Insulating Gloves SEKURECO

It's asignal of obligation indicating the compulsory use of insulating gloves in certain spaces for tasks related to electricity. The cartel reports the obligation to use this type of individual protection equipment (EPI'S) to workers or visitors to power plants and industries

Insulating gloves are designed to protect the user from potential electrical discharges or other electrical risks. These gloves are made of special materials that allow limited electric driving and prevent electricity from passing through the glove and damaging the user. It is important to follow safety standards and use appropriate protective equipment in any work that involves electrical risks.

Meanwhile, the signal tells people to wear insulating gloves to protect themselves from potential safety or health risks in these types of work areas. The poster is made of resistant vinyl adhesive. Meanwhile, the blue color is commonly used to indicate that the use of personal protective equipment is mandatory.

Among the most common technical characteristics of obligation signals with SEKURECO UV inks are:

• Form:It is usually a circle with a blue edge and a white pictogram that represents a hand with a glove.
• Size:Can vary depending on the size and location of the work area.
• Colours:Security signals use specific colors to communicate their message. Blue is commonly used to indicate that personal protective equipment is compulsory.
• The material: safety signals can be made from different materials, such as plastic, aluminum or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.
• Check the product available:It is mandatory to wear gloves with UV inks. 

SEÑAL GLASSPACK PVC: DESCRIPTION

The signs ofGLASSPACKOf0,7 mmConsist of a semi-rigid polymer base (PVC) with a bright white finish to which color coating and protection is applied by screen printing techniques.

Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.

• SOPORTE:A glass pack of 0,7 mm (semi-rigid PVC) of a bright white colour.
• COLOR CAPA:For use in the manufacture of products falling within heading No 8542:. Colour black, green, red, blue, yellow, orange depending on the signal typeBRILLANT, PROTECTION OF SEÑAL AGAINST UV RAYS.

SEÑAL PVC ADHESIVO (PEGATINA)

The signs are manufactured on a self-adhesive white gloss calendered monomeric vinyl sheet

Color coating is applied using serigraphic techniques.

The adhesive is protected against inclement weather by a glossy transparent calendered laminate.

Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.

Description of the vehicle:

• LAMINATE TRANSPARENT BRILLIANT FINISHOf 0,8 mm. Transparent film of CALANDRED PVC with MONOMERIC PLASTIFICANT, free of cadmium, with UV filter.
• COLOR CAPAEPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
• VINILO AUTOADHESIVO0,08 mm made of white PVC resin. Back side of the adhesive.

SEMIRRÍGIO PVC SOPORT - GLASSPACK

Gloss-finished, high optical quality compressed PVC backing especially suitable for printing using screen printing techniques with UV curing inks in offset.

SOPORTE VINILO MONOMÉRICO AUTOADHESIVO

Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.

Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.

COLOR CAPA TINTES

Color layer (according to signal requirements) by serigraphic inks of cured by means of UV radiation of polyvalent use on various plastics.

It is inks with glossy finish, whose mixture of compounds and radiated healing method gives it an excellent elasticity and reactivity, not only in overprint if not also in the face of the bend and the skeleton.

Mixtures of oligomers, monomers, photoinitiators and pigments.

Ink contains the following dangerous elements:

• Hexametylene diacrylate

• Isobornil acrylate

• Oxybis diacrylate (methyl-2,1-ethanoediyl)

• 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

PVC GLASSPACK 0'7 mm

300 x 400 mm

ADHESIVOS DE VINILO

200 x 300 mm

150 x 200 mm

100 x 150 mm

ALUMINIO 0'5 mm

300 x 400 mm

210 x 300 mm

PVC BLANCO 3 mm

600 x 800 mm

800 x 1200 mm

APPLICATIONS

Obligation signals can be found in a wide range of environments, from factories to hospitals, laboratories and offices. Specifically this sign of mandatory use of insulating gloves is frequently installed in places such as factories and electricity plants that require this important safety notice.

They are usually located on walls at a considerable height that is easy to read and appreciate by users, often installed in establishments where some physical and health risk activity is performed. Meanwhile, they can be found in places like:

• Floors
• Electricity workshops
• Laboratories
• Electrical rooms, etc

INSTALATION / EMPLACEMENT / SERIAL COLOCATION

Check our blog to learn how to install a sign or sign: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To properly place an obligation sign indicating that gloves are compulsory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye level and in a place where it cannot be obstructed by other objects or signals.

TheFIJATIONThe signalling element must be placed on a firm surface free from dirt.

The signal may be secured by:MECHANIC ELEMENTS(screws, rivets, etc.) orADHESIVOS(mounting adhesive, glues, silicones, etc.) carefully, avoiding dirt on the visible surface or deformation of the surface.

MAINTENANCE AND RECOMMENDATIONS

In order to preserve the functionality for which the signalling systems have been designed, SEKURECO recommends that signals be kept free from dust, dirt or any residue or object that prevents their visibility and identification.

For cleaning it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the signal.

The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.

GARANTIA

SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, on Guarantees in the Sale of Consumer Goods.

ON SEKURECO

They're occupational safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and safety at work and the lack of a company specialized in the sector. It offers a range of more than 10 000 specialized products for occupational protection, available to companies and individuals, of the best brands and at the most competitive prices on the market.