€4.56 (no TAX)
Sign indicating Smoking Allowed Within This Area, with UV inks of 210 x 300 mm SEKURECO
Signal indicated Allowed to smoke Within this SEKURECO Zone.
It consists of pictogram and text
€38.87 (no TAX)
"Permitted Fumar Inside This Zone" is a sign of obligation, ideal to install in spaces where smoking is allowed. The poster consists of text and pictogram that represents a cigarette on
These signals are usually located in visible and user-friendly spaces, and it is even mandatory for industries that the place to be installed is visible and fully illuminated
Among the most common technical characteristics of obligation signals with SEKURECO UV inks are:
- Form: it is usually a circle with a blue edge and a pictogram that represents a cigarette on
- Size:Can vary depending on the size and location of the work area.
- Colours:Security signals use specific colors to communicate their message. Blue is commonly used to indicate that personal protective equipment is compulsory.
- The material:Safety signs may be made of different materials, such as plastic, aluminium or vinyl sticker. The material used will depend on the location and environment in which the signal will be placed. For example, if the signal is placed in an area where there is a lot of dust or moisture, it is advisable to use a material resistant to these conditions.
- See the product available:Safety signal with UV inks It is Obligatory Use Gloves Insulating SEKURECO
SEÑAL GLASSPACK PVC: DESCRIPTION
The signs ofGLASSPACKOf0,7 mmConsist of a semi-rigid polymer base (PVC) with a bright white finish to which color coating and protection is applied by screen printing techniques.
Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.
- SOPORTE:A glass pack of 0,7 mm (semi-rigid PVC) of a bright white colour.
- COLOR CAPA:For use in the manufacture of products falling within heading No 8542:. Colour black, green, red, blue, yellow, orange depending on the signal typeBRILLANT, PROTECTION OF SEÑAL AGAINST UV RAYS.
SEÑAL PVC ADHESIVO (PEGATINA)
The signs are manufactured on a self-adhesive white gloss calendered monomeric vinyl sheet
Color coating is applied using serigraphic techniques.
The adhesive is protected against inclement weather by a glossy transparent calendered laminate.
Our products areNon-toxic, non-radioactive, non-combustible and resistant to aging.
Description of the vehicle:
- LAMINATE TRANSPARENT BRILLIANT FINISHOf 0,8 mm. Transparent film of CALANDRED PVC with MONOMERIC PLASTIFICANT, free of cadmium, with UV filter.
- COLOR CAPAEPOXIDE RESINS of black, green, red, blue, yellow, orange depending on the signal type.
- VINILO AUTOADHESIVO0,08 mm made of white PVC resin. Back side of the adhesive.
SEMIRRÍGIO PVC SOPORT - GLASSPACK
Gloss-finished, high optical quality compressed PVC backing especially suitable for printing using screen printing techniques with UV curing inks in offset.
TECHNICAL DATA
|
||
PROPERTIESS |
METHOD OF PRUEBA |
VALUE TÍPICO |
Tolerance of the thickness |
|
▪ 300£ 400 Of which: ± 5% |
Density |
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Point of softening VICAT 1 kg / in oil / as samples stacked) |
ISO 306-A50 |
83 ± 2 °C |
Point of softening VICAT 5 kg / in oil / like samples stacked) |
ISO 306-A50 |
74 ± 2 °C |
Stress a the traction |
ISO 527 -1/-2 |
45 ± 3 N/mm2 |
Deformation a the traction |
ISO 527 -1/-2 |
5 ± 1% |
Point of fluency |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Point of breaking |
ISO 527 -1/-2 |
▪ 80 percent |
Trial of impact |
ISO 8256 |
▪ 500 kJ/m2 |
Deformation the impact |
ISO 8256 |
11 ± 2 mm |
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SOPORTE VINILO MONOMÉRICO AUTOADHESIVO
Fused digital printable vinyl sheet calendered monomeric (80μ) white self-adhesive gloss.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, and then lifted and repositioned if necessary.
TECHNICAL DATA
|
||
PROPERTIES |
METHOD OF PRUEBA |
VALUE TÍPICO |
Materials |
|
Manufacture from materials of any heading calendered monomeric |
Finished |
|
White brightness |
Thickness |
Micrometer Federal Bench |
80 Of which: |
Kind of of adhesive |
|
Manufacture from materials of any heading base water |
Adherence |
Pellability FTM 1 (180o) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application |
|
Dry |
Elongation |
FTM 14 |
The 0.5 mm |
Rank of temperature of application |
|
-50°C a +90°C |
Kind of of substrate |
|
Aluminium, Glass, PMMA, PC, ABS, Painting |
COLOR CAPA TINTES
Color layer (according to signal requirements) by serigraphic inks of cured by means of UV radiation of polyvalent use on various plastics.
It is inks with glossy finish, whose mixture of compounds and radiated healing method gives it an excellent elasticity and reactivity, not only in overprint if not also in the face of the bend and the skeleton.
Mixtures of oligomers, monomers, photoinitiators and pigments.
Ink contains the following dangerous elements:
• Hexametylene diacrylate
• Isobornil acrylate
• Oxybis diacrylate (methyl-2,1-ethanoediyl)
• 1-vinylhexahydro-2H-azepin-2-one
ACTION
PVC GLASSPACK 0’7mm
210x300mm
PVC BLANCO 3 mm
600x800mm
800x1200mm
APPLICATIONS
They are usually located on walls at a considerable height that is easy to read and appreciate by users, often installed in establishments such as:
- Commercial centres
- Establishments
- Supermarkets
INSTALATION / EMPLACEMENT / SERIAL COLOCATION
Check our blog to learn how to install a sign or sign: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To properly place an obligation sign indicating that gloves are compulsory, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the signal at eye level and in a place where it cannot be obstructed by other objects or signals.
TheFIJATIONThe signalling element must be placed on a firm surface free from dirt.
The signal may be secured by:MECHANIC ELEMENTS(screws, rivets, etc.) orADHESIVOS(mounting adhesive, glues, silicones, etc.) carefully, avoiding dirt on the visible surface or deformation of the surface.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signalling systems have been designed, SEKURECO recommends that signals be kept free from dust, dirt or any residue or object that prevents their visibility and identification.
For cleaning it is advisable to use soapy solutions preferably, avoiding the use of solvents or abrasive products that may damage the surface of the signal.
The working temperature shall not exceed 45 °C. Higher temperatures may deform the support material.
GARANTIA
SEKURECO offers in this product the legal guarantee of 2 years contained in Law 23/2003, of 10 July, on Guarantees in the Sale of Consumer Goods.
ON SEKURECO
They're occupational safety experts! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and safety at work and the lack of a company specialized in the sector. It offers a range of more than 10 000 specialized products for occupational protection, available to companies and individuals, of the best brands and at the most competitive prices on the market.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@