Sign indicating Mandatory Lights On, with SEKURECO UV inks

Obligation sign Sekureco which indicates the obligation to keep lights on. This sign is usually used to indicate that it is mandatory to use the vehicle's low beam headlights at all times, even during the day, in order to improve visibility and reduce the risk of traffic accidents.

The obligation sign Sekureco it is also installed inside industries, private parking lots, where visibility could be poor, due to the lack of natural light. Meanwhile, theobligation sign it is available in different formats and in 5 different sizes. This made with UV inks with excellent adhesion and a matte finish so it can be installed both indoors and outdoors

The sign indicates the mandatory use of lights on with a pictogram that represents a light bulb in white, while the color blue is frequently used in obligation signs

It should be noted that using the lights on during the day increases the visibility of the vehicle, which can help avoid collisions in low visibility conditions, such as on cloudy days or rainy days, this, in turn, makes the vehicle Be more visible to other drivers, pedestrians and cyclists, which can help reduce the risk of accidents.

The sign of mandatory use of lights on Sekureco it is placed in places where the mandatory use of vehicle lights is required during the day, such as in tunnels, highways, mountain roads, and other industrial areas. However, the use of the vehicle's headlights during the day should not replace the use of the low beam headlights at night or in low visibility conditions. Additionally, it is important to ensure that the vehicle's lights are in good condition and working properly before driving.

Among the most common technical characteristics of obligation signs with SEKURECO UV inks are:

• Shape: it is usually a circle with a blue border and a white pictogram representing a light bulb
• Size:May vary depending on the size and location of the work area.
• Colors:Safety signs use specific colors to communicate their message. The color blue is commonly used to indicate that the use of personal protective equipment is mandatory.
• Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.

GLASSPACK PVC SIGN: DESCRIPTION

The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

• MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
• COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.

ADHESIVE PVC SIGN (STICKER)

Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl

The color coating is applied to it using silk-screen techniques.

The adhesive is protected against the elements by a transparent gloss calendered laminate.

Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.

Description:

• TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
• COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of sign.
• SELF-ADHESIVE VINYL0.08 mm made of white PVC resin. ADHESIVE back side.

SEMI-RIGID PVC SUPPORT - GLASSPACK

Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with offset UV curing inks.

SELF-ADHESIVE MONOMERIC VINYL SUPPORT

Molted Printable Digital Vinyl Lamina Monomeric Calant (80µ) Self -adhesive shine color.

Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, to later be lifted and repositioned if necessary (a characteristic is lost when excessive pressure is exerted).

Color layer inks

Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.

These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.

Mixture of oligomers, monomers, photoiniciators and pigments.

The ink contains the following dangerous elements:

• Hexamethylene diacrylate

• Isobornyl acrylate

• Oxybis(methyl-2,1-ethanediyl) diacrylate

• 1-vinylhexahydro-2H-azepin-2-one

DIMENSIONS (MM)

PVC GLASSPACK 0.7 mm

210x300mm

300x400mm

VINYL STICKERS

150x200mm

100x150mm

200x300mm

ALUMINUM 0.5 mm

210x300mm

300x400mm

APPLICATIONS

The obligation sign "Mandatory lights on" is frequently installed on:

• Tunnels
• Freeways
• Mountain roads
• Industrial zones

INSTALLATION / LOCATION / SIGN PLACEMENT

Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html

To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.

TheFIXATIONThe signaling element must be carried out on a firm and free surface.

The signal may be ensured byMECHANICAL ELEMENTS(Tornillery, rivets, etc ...) orADHESIVES(Assembly adhesive, queues, silicones ...) carefully, avoiding dirty view or deformation of it.

MAINTENANCE AND RECOMMENDATIONS

With the objective of conserving the functionality for which signaling systems have been conceived, Sekureco recommends maintaining signals free of dust, dirt or any rest or object that avoids visibility and identification of them.

For cleaning it is advisable to use soap solutions preferably, avoiding the use of solvents or abrasive products that can deteriorate the surface of the signal.

The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.

NORMATIVE

EN ISO 7010:2012 - European Standard to standardize pictograms, symbols and arrows for obligation, prohibition and danger signs.

WARRANTY

SEKURECO offers on this product the 2-year legal guarantee included in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.

ABOUT SEKURECO

Experts in workplace safety! We are a young company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety and due to the lack of a company specialized in the sector. It offers more than 10 thousand products specialized in labor protection, available to companies and individuals, from the best brands and at the most competitive prices on the market.