For the purposes of this Regulation, the following definitions shall apply:

• Aperture: 19 mm
• Material: Galvanized steel
• Weight: 170 g
• Measures 108 x 60 mm
• Minimum static resistance: 20 kN
• In accordance with: EN 362

--------------------------------------------------------------------

The santi-fall systems in order to protect workers from the possibility of falling to different heights while carrying out their duties, they must have different elements which are essential, as is the case with connectors, there are different options on the market, as in the case of other, of circular cross-section. What. In Sekureco you have a wide range of options in terms of types and models and can choose the one that best suits your needs and preferences. One of them is the Automatic steel musket Ø19 mm 108x60the measurements shall be carried out in accordance with the requirements of this Regulation.

The Automatic steel musket Ø19 mm 108x60the measurements shall be carried out in accordance with the requirements of this Regulation it has a 19 mm aperture and is made of galvanized steel. It weighs 170 grams and measures 108 x 60 mm, with a minimum static resistance of 20 kN and complying with EN 362.

The anti-fall systems they must necessarily consist of three elements, namely the anchorage point, the worker restraint (harness) and a device to reduce the force of impact in the event of a fall to protect the worker. These elements must be connected to each other and for this purpose connectors are used, which serve as links between them to make the set of these into a single unit other i mean, literally.

Depending on the conditions of each work activity, it should be determined which type of connector is most appropriate to have a higher level of comfort and safety, being able to find muskets with thread closure, muskets with automatic lock, hooks with automatic lock and lock and different special connectors for tying to scaffolding, tubes, etc., all of them manufactured with different types of material and with different opening diameters.

As with the other components of the anti-fall systems, these musketeers they must be checked regularly to ensure that they are in perfect working order and that their use will not present any risk to the professional. Similarly, if, for whatever reason, they show any signs of deterioration, they should be replaced with new ones to avoid any risk to the health and safety of workers, which should be the highest priority for companies in all types of work and especially in those where failure to take appropriate measures can lead to fatal outcomes.

In Sekureco have at their disposal all the safety features and equipment they may need to enable their workers to carry out their work with the greatest possible degree of protection, which will also help them to perform better at their workplace.