Multifunctional tubular with flame retardant and antistatic fabric Nomex® Fire Resistant BUFF

• Workers who carry out activities in cold weather conditions that require protection against heat, flames, thermal risks and potentially explosive substances
• Chemical and petrochemical industry personnel, police officers, military personnel and others

CE CAT 1 EN ISO 13688/13

Product certified as Personal Protective Equipment against minimal risks derived from the cold in accordance with Regulation (EU) 2016/425. The products marked with this icon have been tested for protection against minimal risks derived from cold in cool environments, characterized by the possible combination of humidity and wind at a temperature equal to or greater than 5ºC and up to 10ºC, in accordance with the following safety standards. test: EN ISO 13688:2013 General requirements, Protective Clothing, and fabric according to standards EN ISO 11092:2014 (Rct), EN ISO 9237:1995 (AP- Air Permeability), EN ISO 13938-2:1999 (properties mechanical and physical: burst).

TESTS ON FABRIC

Lamellar doughIn the case of vehicles of categories M1 and N2

Air permeabilityEN ISO 9237:1995      In the case of vehicles of categories m1 and n2

Thermal resistance (RCT):EN ISO 11092:2014     0.0335 m2K/W ± 10%

Resistance to water vapor (RET)For the purposes of this Regulation, the following definitions shall apply:

Burst resistance (5 washes): For the purposes of this Regulation, the following definitions shall apply:

Determination of dimensional variations of fabrics

EN ISO 5077:2008 LONGITUDINALThe-10% CROSSThe-3%

4N washing program (Ta=40 ±3oC) according to ISO 6330:2012

Pilling resistance

ISO 12945-2:2001 4 2000 CYCLES

Scale from 1 to 5. 1 is “Very severe pilling” and 5 is “No pilling formation”

Abrasion resistance:>100000 CYCLES

EN ISO 12947-2:2016Test pressure: 9kPa    Until a thread breaks

Solidity ranges:

Washing strength of dyes 4-5*

EN ISO 105-C06:2010 

Color fastness to perspiration (Acid & Alkaline): EN ISO 105-E04:2013

Fastness of dyes to rubbing (Dry and Wet) EN ISO 105-X12:2016

Fastness of dyes to seawater:     4 – 5 *

EN ISO 105-E02:2013

Lightfastness of dyes 4-5 **

EN ISO 105-B02:2014 Method 2

* Solidity range between values 1 and 5, in which 1 is "VERY POOR" and 5 is "EXCELLENT" ** Solidity range between values 1 and 8, in which 1 is "VERY POOR" and 8 is "EXCELLENT"

POLAR FIREVRESISTANT

Lamellar doughFor the purposes of this Regulation, the following definitions shall apply:

Air permeabilityEN ISO 9237:1995      1164mm/s ±10%

Thermal resistance (RCT):EN ISO 11092:2014     0.085 m2K/W ± 10%

Resistance to water vapor (RET): EN ISO 11092:2014     8.38 m2Pa/W ± 10%

Determination of breaking force and elongation

EN ISO 13934-1:2013

Burst resistance (5 washes): EN ISO 13938-1:1999         392 kPa ± 10%

Determination of dimensional variations of fabrics

EN ISO 5077:2008 LONGITUDINAL< ±3%CROSS< ±3%

4N washing program (Ta=40 ±3oC) according to ISO 6330:2012

Pilling resistance

ISO 12945-2:2001     2-3    2000 CYCLES

Scale from 1 to 5. 1 is “Very severe pilling” and 5 is “No pilling formation”

Abrasion resistance:>42500 CYCLES

EN ISO 12947-2:2016Test pressure: 9kPa    Until a thread breaks

Solidity ranges:

Fastness of dyes to washing       4*

EN ISO 105-C06:2010 

Color fastness to perspiration (Acid & Alkaline): EN ISO 105-E04:2013

Fastness of dyes to rubbing (Dry and Wet) EN ISO 105-X12:2016

Fastness of dyes to seawater:     4 – 5 *

EN ISO 105-E02:2013

Fastness of dyes to light        3-  4 **

EN ISO 105-B02:2014 Method 2

* Solidity range between values 1 and 5, in which 1 is "VERY POOR" and 5 is "EXCELLENT" ** Solidity range between values 1 and 8, in which 1 is "VERY POOR" and 8 is "EXCELLENT"

ABOUT BUFF