€14.94 (no TAX)
Danger sign! Thermal Contact (UV inks) SEKURECO
Danger sign! Thermal Contact (UV inks) SEKURECO. The poster consists of text and pictogram on a yellow layer as a safety color
For textile, food or chemical industries
€0.78 (no TAX)
Sign that warns about the danger of thermal contact in a certain area. The size of the poster is your choice and it is available in three different materials
The text indicates that there is a danger related to thermal contact, that is, with contact with objects or surfaces that are at high temperatures
There are several industries in which there is a danger of thermal contact, such as metallurgical industry, chemical industry, food industry, textile industry and construction, among others. In these industries, workers can be exposed to high temperatures, flames, steam or hot surfaces, which can cause burns or serious injuries. It is important that adequate security measures are implemented to protect workers from these risks.
Among the most common technical characteristics of prohibition signs with SEKURECO UV inks are:
- Shape:It is usually a circle with a pictogram and text
- Size:May vary depending on the size and location of the work area.
- Colors:Safety signs use specific colors to communicate their message. The color red is used for prohibition signs and to warn about dangerous behavior
- Material:Safety signs can be made of different materials, such as plastic, aluminum, or vinyl sticker. The material used will depend on the location and environment in which the sign will be placed. For example, if the sign is placed in an area where there is a lot of dust or humidity, it is advisable to use a material resistant to these conditions.
GLASSPACK PVC SIGN: DESCRIPTION
The signs ofGLASSPACKOf0.7mmThey consist of a semi-rigid polymer base (PVC) with a glossy white finish on which the color and protection coating is applied using screen printing techniques.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
- MEDIUM:0.7 mm GLASSPACK SHEET (semi-rigid PVC) in glossy white color.
- COLOR LAYER:Of screen printing inks cured by means of UV radiation for multipurpose use. COLOR BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of signalGLOSSY FINISH, SIGNAL PROTECTION AGAINST UV RAYS.
ADHESIVE PVC SIGN (STICKER)
Signs are manufactured on a sheet of self-adhesive gloss white monomeric calendered vinyl
The color coating is applied to it using silk-screen techniques.
The adhesive is protected against the elements by a transparent gloss calendered laminate.
Our products areNON-TOXIC, NON-RADIOACTIVE, NON-COMBUSTIBLE and RESISTANT TO AGING.
Description:
- TRANSPARENT LAMINATE GLOSSY FINISH0.8 mm. Transparent CALANDRED PVC film with MONOMERIC PLASTICIZER, cadmium-free, with UV filter.
- COLOR LAYEREPOXY RESINS IN BLACK, GREEN, RED, BLUE, YELLOW, ORANGE depending on the type of sign.
- SELF-ADHESIVE VINYL0.08 mm made of white PVC resin. ADHESIVE back side.
SEMI-RIGID PVC SUPPORT - GLASSPACK
Compressed PVC support with a glossy finish, of high optical quality, especially suitable for printing using screen printing techniques with offset UV curing inks
TECHNICAL DATA |
||
PROPERTIESYES |
TESTING METHOD |
TYPICAL VALUE |
Tolerance of the thickness |
|
> 300£ 400 µm ± 5% |
Density |
ASTM D-792 DIN 53479 |
1.33 ± 0.01 g/cm3 |
Spot of softening VICAT (1kg / in oil / as samples stacked) |
ISO 306-A50 |
83± 2 °C |
Spot of softening VICAT (5kg / in oil / as samples stacked) |
ISO 306-A50 |
74 ± 2°C |
Strain to the traction |
ISO 527 -1/-2 |
45± 3N/mm2 |
Deformation to the traction |
ISO 527 -1/-2 |
5± 1% |
Spot of creep |
ISO 527 -1/-2 |
36 ± 3 N/mm2 |
Spot of breakage |
ISO 527 -1/-2 |
> 80% |
Proof of impact |
ISO 8256 |
> 500 kJ/m2 |
Deformation to the impact |
ISO 8256 |
11 ± 2 mm |
Absorption of water |
ASTM D-570 DIN 53495 |
0.004 ± 0.002 % |
SELF-ADHESIVE MONOMERIC VINYL SUPPORT
Monomeric calendered cast digital printable vinyl sheet (80µ) glossy white self-adhesive.
Removable water-based acrylic adhesive, which allows the application to be fixed and removed under very light pressure with the fingers, to later be lifted and repositioned if necessary (a characteristic is lost when excessive pressure is exerted).
TECHNICAL DATA |
||
PROPERTIES |
TESTING METHOD |
TYPICAL VALUE |
Material |
|
Vinyl calendered monomeric |
Finish |
|
White glow |
Thickness |
Micrometer Federal Bench |
80 µm |
Guy adhesive |
|
Acrylic base water |
Adherence |
Peelability FTM 1 (180º) |
5 N/25 mm 24 h 23°C/50%RH |
Method of application |
|
Dry |
Elongation |
FTM 14 |
The 0.5 mm |
Range of temperature of application |
|
-50°C to +90°C |
Guy of substrates |
|
Aluminum, Glass, PMMA, PC, ABS, Paint |
COLOR LAYER INKS
Color layer (according to the needs of the sign) using screen printing inks cured by means of UV radiation for multipurpose use on various plastics.
These are inks with a glossy finish, whose mixture of compounds and radiated curing method give them excellent elasticity and reactivity, not only in overprinting but also in folding and die-cutting.
Mixture of oligomers, monomers, photoinitiators and pigments.
The ink contains the following dangerous elements:
• Hexamethylene diacrylate
• Isobornyl acrylate
• Oxybis(methyl-2,1-ethanediyl) diacrylate
• 1-vinylhexahydro-2H-azepin-2-one
DIMENSIONS (MM)
PVC GLASSPACK 0.7 mm
300x400mm
210x300mm
VINYL STICKERS
200x300mm
150x200mm
100x150mm
ALUMINUM 0.5 mm
300x400mm
210x300mm
*This measurement is served with perforated corners
APPLICATIONS
Metallurgical industry
Chemical industry
Food industry
Textile and construction industries, among others
INSTALLATION / LOCATION / SIGN PLACEMENT
Check out our blog to learn how to install a sign or poster: https://www.sekureco.eu/blog/76_consejos-de-instalacion-de-senales-de-seguridad.html
To correctly post a mandatory sign indicating that gloves are required, it is important to ensure that it is clearly visible to people entering the work area. It is recommended to place the sign at eye level and in a place where it cannot be obstructed by other objects or signs.
TheFIXATIONThe signaling element must be placed on a firm surface free of dirt.
The signal can be secured byMECHANICAL ELEMENTS(screws, rivets, etc...) orADHESIVES(assembly adhesive, glues, silicones...) carefully, avoiding soiling the visible surface or deforming it.
MAINTENANCE AND RECOMMENDATIONS
In order to preserve the functionality for which the signaling systems have been designed, SEKURECO recommends keeping the signals free of dust, dirt or any debris or object that prevents their visibility and identification.
For cleaning, it is advisable to preferably use soapy solutions, avoiding the use of solvents or abrasive products that could damage the surface of the sign.
The working temperature should not be higher than 45º C. Higher temperatures can deform the support material.
WARRANTY
SEKURECO offers on this product the 2-year legal guarantee included in Law 23/2003, of July 10, on Guarantees in the Sale of Consumer Goods.
NORMATIVE
EN ISO 7010 2012 - Graphic symbols and colors for safety signs for accident protection, fire fighting and emergency evacuations.
ABOUT SEKURECO
Experts in workplace safety! We are a young and recently created company that emerged in 2016 thanks to the passion of several technicians specialized in prevention and occupational safety. Sekureco offers more than 10 thousand products specialized in labor protection, available to companies and individuals, from the best brands and at the most competitive prices on the market
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@