Anchorage point with flame resistant tape Irudek For the purposes of this Regulation, the following definitions apply:
Anchor point made of flame-resistant tape. It has anchor tape Irudek For the purposes of this Regulation, the following definitions apply:
€34.88 (no TAX)
Anchorage point made of 44 mm flame-resistant tape, with a total length of 1,50 metres. It has 2 steel rings at each end.
Anchoring Tape is a movable anchorage point used for connection in a slip resistant system. It is very suitable in work areas where there are horizontal beams and pipes or other structures where it can be installed as an anchor point.
Their lightness, versatility and different sizes make them the most used and versatile anchors.
Equipment with characteristics similar to Heat-resistant and flame-resistant harnesses Irudek Flame resistant FR 3.
CHARACTERISTICS
- Anchoring tape obtained from polyester tape and two steel rings.
- The Flame Resistant range offers flame resistant EPIs, for work at height and welding environments.
- Thanks to the bands of aramide and sewn with Kevlar thread, a resistance of up to 371oC is achieved.
TECHNICAL DATA
- Length: 150 cm
- Weight: 280 g
- For the purposes of this Regulation, the following definitions apply:
- Tape width: 45m
- Distance to stop: 1 meter
- Shelf life: 10 years of use + 1 storage
MATERIALS
- Tape: Aramide
- Sewn: Kevlar
- Metallic components: Steel
- Finished: Rebarbed and polished
PACKAGING
Weight: 280 gramsAPPLICATIONS
The Flame Resistant range offers flame resistant EPIs, for work at height and welding environments. Thanks to the bands of aramide and sewn with Kevlar thread, a resistance of up to 371oC is achieved.
STANDARDS AND REGULATIONS
- IN 795B
- IN ISO 9150
- IN ISO 15025
LIFETIME
The estimated service life of the equipment is 11 years from the date of manufacture (1 year of storage and 10 years of use). The following factors can reduce product life: heavy use, contact with chemicals, particularly harsh environments, exposure to extreme temperatures, exposure to ultraviolet rays, abrasion, cuts, heavy impacts, or poor use and maintenance. The mandatory annual review shall validate the correct operation of the equipment.MAINTENANCE AND CLEANING
- CLEANING: Personal protective equipment must be cleaned in such a way as not to cause adverse effects on the materials used in the manufacture of the equipment. For textile and plastic materials (tape, rope) clean with a cotton cloth or brush. Do not use any abrasive material. For deep cleaning, wash the equipment at a temperature between 30oC and 60oC using a neutral detergent. For metal parts, use a damp cloth. If the equipment gets wet, either from use or from cleaning, it should be allowed to dry naturally away from direct heat.ABOUT IRUDEK
Irudek Group is an expanding group of companies with headquarters in Spain, operations in Italy, Brazil and India and sells its products in more than 50 countries. Irudek Group is safety and guarantee, backed by years of experience and by customers who have placed their trust in its products.
heading
Ficha Técnica Ficha Técnica Punto de anclaje co cinta resistente a la llama Irudek Flame Resistant FR 6 (150cm) download
Declaración de Conformidad Cumple con los requisitos del Reglamento/ Directiva de Equipos de Protección Individual (EPI) download
Manual de Usuario Leer atentamente las instrucciones de uso antes de utilizar la cinta de anclaje download
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@ @VERIFY_PURCHASE@@COMMENT_TITLE@
@COMMENT_COMMENT@